How to Install the Prodigy P2 on a 2015 Ford F-150 with Factory 7-Way

Question

Question:

Does the part #22292 make this virtually a plug and play situation my 2015 F150 has the tow package but not the factory brake control installed it has the 7pin and 4 pin trailer connectors on the bumper. Would I need to install anything else? Fuses or relays? Thanks for any help you can give.

asked by: R P

0

Expert Reply:

Yes, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 22292 will make the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 completely plug and play. There will be no other parts needed or required to install this brake controller on your 2015 Ford F-150.

I have attached an install video which shows the entire process.

expert reply by: Conner L

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 6

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 7

Thanks for reaching out, Chris! I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System #TGMRTT35D along with a spacer kit to take up that extra spacing. If your vehicle frame is the same height…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 11

There's two options for high capacities hitches for your 2022 Ford F-150 Tremor. Which one you need will depend on whether or not your truck currently has a hitch installed. I have listed both options below along with their weight capacities:…

view full answer...

Answer 12

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

How to Install the Prodigy P2 on a 2015 Ford F-150 with Factory 7-Way

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching