Recommended Trailer Hitch for a 2011 Scion xB
Question:
I have a 2011 Toyota Scion XB car. I want to buy a trailer hitch for it to pull a small 14’ aluminum fishing boat but, I have no idea to which hitch to buy that it would fit on my car. Could you please send me a picture and price to so I can order it from you guys in your website? I’ll appreciated all your help. Have a great day!
asked by: Alfredo R
Expert Reply:
The trailer hitch that I recommend using for your 2011 Scion xB is the Curt # C12490. This is a Class II trailer hitch with a 1-1/4" receiver. It has a 350 lb tongue weight rating and a 3,500 lb gross trailer weight rating. But your vehicle may not be rated for this much. You will need to confirm the weight rating of your Scion in your owner's manual.
You will also need wiring, like the recommended T-Connector # C56035, and a ball mount kit like part # C45147. Check out the linked ball mount article to ensure that the 3/4" rise is correct for your application.
Please note that when I took a look at an online version of your owner's manual it stated that Toyota does not recommend towing with your vehicle. I recommend checking your copy of the owner's manual to verify this. If you do decide to still tow a trailer and your copy says not to then if there is damage as a result of towing Toyota will most likely not cover it.
I have attached some installation videos, instructions, and a picture of the recommended trailer hitch for you to check out. The pricing can be found on the product pages.
Products Referenced in This Question
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 0 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Q&A: Why Can't Class II Accessories Be Used with Class I Trailer Hitch Receiver
- Q&A: Recommended Bike Rack That Will Not Have Clearance Issues Installed On BMW 440i W/ Curt Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Rooftop Cargo Carriers
- Q&A: Tongue Weight of Draw-Tite 24815 for 2008 Scion xB
- Q&A: Tongue Weight Capacity and Stabilization Strap for Curt Trailer Hitch Receiver # C11679
- Article: Hitch Adapters and Extenders
- Article: How to Choose the Right Trailer Hitch Class
- Article: Roof Rack Information
- Q&A: 1-1/4 Inch To 2 Inch Trailer Hitch Adapter For A 2009 Ford Focus
- Article: Trailer Hitch Receiver Sizes
- Article: How to Measure for Trailer Hitch Drop