Replacement SecureLock Endcap for Thule Xsporter Pro on 2018 Toyota Tacoma

Question

Question:

Do you have the locks that work with these?

asked by: John

0

Expert Reply:

I believe you are asking about the SecureLock endcaps that go with the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XTB-THXK4B that fit your 2018 Toyota Tacoma with the Deck Rail System.

If so we do have the Replacement Upright Locking Endcap for Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # 8523166001 which you can lock with the use of the Thule One-Key System Lock Cylinders # TH450200.

expert reply by: Kyle S

0

Answer 1

The Replacement Rubber Strip for Ladder Rack TH376 - #853-3544-23 fits a channel that is 0.443 inches wide at lip. This is 70-1/2 inches long and is a thicker material. This strip is just about 1" wide total. I've linked a photo that shows…

view full answer...

Answer 2

The #8523166001 replacement end cap you referenced doesn't use a screw to fasten, it uses a Thule lock core. This end cap is meant to be used on the bottom of the uprights, as shown in the diagram I've provided. I believe you're actually…

view full answer...

Answer 3

I believe you're looking for what Thule refers to as the Upright Locking Cap, which we offer as part #8523166001. You can see the part in the parts diagram I've provided.

view full answer...

Answer 4

I do have a workaround for you but straight out of the box there are no locks for the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB for your 2020 Jeep Gladiator. The workaround is that the Thule Xsporter Pro #TH500XTB does come with a…

view full answer...

Answer 5

For your ARB brackets, you can use the Replacement M6 x 20 T-Bolt for Thule Trail XT Cargo Baskets #TH36JV which is an M6x20mm T-bolt.

view full answer...

Answer 6

The correct replacement rubber stripping for your Thule Xsporter Pro Ladder Rack TH422XT is the Replacement Rubber Strip for Ladder Rack part #853-3544-23. I spoke with my contact at Thule to confirm this.

view full answer...

Answer 7

We have each of the replacement parts you need for your Thule Xsporter Pro Ladder Rack #TH500XT (Silver) or #TH500XTB (Black). The bed rail clamps you referred to are sold individually, so you will need Replacement Bed Rail Clamp #8523159001 (Silver)…

view full answer...

Answer 8

The correct channel cover you need for your older Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack is the Replacement Rubber Strip for Ladder Rack part #853-3544-23. I called my contact at Thule to confirm this.

view full answer...

Answer 9

It is definitely feasible. While we do carry the lock cylinders coded to N227, we only sell the locks with spare keys and the change key required to switch out the cylinders. They also only come in pairs of 4. In order to have 6 cylinders, you need 2…

view full answer...

Answer 10

The Yakima ratcheting Bow and Stern tie downs, #Y04031, work well with the Malone Ladder Rack foam blocks part #MPG159. The straps are 12 feet long and have a weight capacity of 150 lbs.

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement SecureLock Endcap for Thule Xsporter Pro on 2018 Toyota Tacoma

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching