Replacement Bed Rail Clamps and T-Bolts for Thule Xsporter Pro Ladder Rack

Question

Question:

Thule Xsporter Pro Ladder racks. Does the replacement bed rail clamps come with mounting t plate and bolt ? Or is just the clamp? If it doesn’t come with t let and bolt, do you sell those as well?

asked by: Brad S

0

Expert Reply:

We have each of the replacement parts you need for your Thule Xsporter Pro Ladder Rack # TH500XT (Silver) or # TH500XTB (Black). The bed rail clamps you referred to are sold individually, so you will need Replacement Bed Rail Clamp # 8523159001 (Silver) or # 8523159002 (Black).

As for the "t-plate" you referenced, I believe you were asking about the Replacement T-Slide Casting for Thule Xsporter Pro Ladder Rack # 8523164001. As for bolts, the only bolts that this rack uses are the Replacement M8 T-Bolt # 853-5715. If you were instead referring to the socket head cap screws, the replacements are Replacement Socket Head Cap Screw for Thule Xsporter Pro Ladder Rack - 3/8"-16 x 3/4" # 8523233001 as well as Replacement M6-1x14mm Socket Head Cap Screw for Thule Ladder Racks # THHD-27059.

expert reply by: Kyle S

0

Answer 1

You could use the Thule M8 T-Bolt part #853-5715 which is just a little longer at 26 mm.

view full answer...

Answer 2

I spoke with a representative of Thule, who told me that they did not classify the 450 lb weight capacity of the Thule XSporter #TH500XT as either static or dynamic and that you only needed to have a capacity of less than 450 lbs and you would be…

view full answer...

Answer 3

You can definitely use the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XT to transport and use your rooftop tent on your 2019 GMC Canyon. I reached out to my contact at Thule who confirmed that your estimated 500 lbs of weight…

view full answer...

Answer 4

I do have a recommendation for you, however, Yakima does not make an adapter for the Yakima HullHound Kayak Saddles w/ Tie-Downs part Y04079 that will allow them to work with the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part…

view full answer...

Answer 5

If you have the Silver Thule Xsporter Pro #TH500XT then you need Rail Clamp #8523159001 but if you have the Black Thule Xsporter Pro #TH500XTB you need Rail Clamp #8523159002. These come in a quantity of 1 so you'll need to order 8 of them if you…

view full answer...

Answer 6

I believe you're looking for what Thule refers to as the Upright Locking Cap, which we offer as part #8523166001. You can see the part in the parts diagram I've provided.

view full answer...

Answer 7

I believe you are asking about the SecureLock endcaps that go with the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XTB-THXK4B that fit your 2018 Toyota Tacoma with the Deck Rail System. If so we do have the Replacement Upright…

view full answer...

Answer 8

The #8523166001 replacement end cap you referenced doesn't use a screw to fasten, it uses a Thule lock core. This end cap is meant to be used on the bottom of the uprights, as shown in the diagram I've provided. I believe you're actually…

view full answer...

Answer 9

The 3/8" x 16" x 1-1/2" Flat set screws that are included in the Replacement Fastener Kit for Thule Xsporter Pro Ladder Rack #TH752-1391-001 are not available separately. However, you could try to find similar bolts at your local…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...