What Does the End of the Gen-Y Hitch Aluminum Loading Ramp Look Like

Question

Question:

This product description says hybrid hook and plate end. The product picture shows hook end. Can you please confirm the ends of this product?

asked by: Andrew

0

Expert Reply:

I attached a picture that shows what the end of the Gen-Y Hitch Aluminum Loading Ramps # 325-GH-R84 looks like. It's a hook style that grabs the trailer so it doesn't slide off.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The height restriction on ramp set #288-07502 has to do with the distribution of the weight, ability for tires to grip, and clearance between the tops of the ramps and the vehicle rolling up them. The shorter the ramp the more severe the angle will…

view full answer...

Answer 2

The Gen-Y Hitch Aluminum Loading Ramp Sets like part #325-GH-R84 can be used on car hauler trailers with multiple cars per Gen-Y. I have attached the full list of options below.

view full answer...

Answer 3

The hook portion of the Gen-Y Hitch Aluminum Loading Ramp Set #325-GH-R84 that gets set on to the rear of the trailer is 14 inches in width. The depth of the hook, or how wide the opening of it is 2 inches.

view full answer...

Answer 4

Yes. You will be able to use the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84 with your 1-3/4" lip. Since the gap between the hook and the ramp is 2 inches, you have enough room. I went ahead and…

view full answer...

Answer 5

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing it…

view full answer...

Answer 6

The Erickson ATV E-Track Tie-Down Kit #EM09160 is intended to secure your trailered 4-wheeled vehicle at the rear tires. The chocks are to be mounted in front of and behind the rear wheels as shown in the linked video and photo. If they were…

view full answer...

Answer 7

The Stallion Aluminum Car Hauler Ramp Set item #288-07502 you were looking at would be the perfect fit for your twin axle trailer. These ramps combined have a 6,000 lbs capacity and only weigh 20 lbs per ramp. They are 5' long x 14-1/2" wide…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Edward, so B and W has a Companion hitch that fits directly to the OEM pucks of your 2023 GMC Sierra 3500 with the part #BWRVK3710 so what that means is you have two options. You could go with the #BWRVK3710 and sell your old hitch second hand to…

view full answer...

Answer 10

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 11

Yes, I do and have listed them below: The Replacement Base for B&W Companion item #BWRVB3710 weighs 83 lbs. The Replacement Head Assembly for B&W Companion item #BWRVC3006 weighs 70 lbs. The B&W Companion OEM 5th Wheel Hitch for Chevy/GMC…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

What Does the End of the Gen-Y Hitch Aluminum Loading Ramp Look Like

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching