Does Anti-Rattle Hitch Pin # SHP2061 Come with Bushing

Question

Question:

Is this 5/8inch dia. ? Does this come with the bushing sleeve that fits over the end of the 1/2inch bolt in the side hole opposite of the nut side? Some of your photos show it, BUT your video does not .

asked by: Robert

0

Expert Reply:

The bushing you mentioned in the product picture for the Anti-Rattle Hitch Pin # SHP2061 that you referenced does come with the kit. The video is older shows an older version of this part number that did not include this. It's in the process of being reshot (as of August 2018).

expert reply by: Jameson C

0

Answer 1

The sleeve you point out in the picture of the Let's Go Aero anti-rattle hitch pin, part #SHP2061, is included. The smooth part of the pin has a smaller diameter than the threaded part and that sleeve takes up the gap in the pin hole. Yes, you…

view full answer...

Answer 2

The Anti-Rattle Hitch Pin for 2" Trailer Hitches part #SHP2061 doesn't have a weight rating provided by Let's Go Aero. However, its a 5/8" bolt so you can estimate it to be between 70,000 and 90,000 lbs.

view full answer...

Answer 3

In regards to the Anti-Rattle Hitch Pin for 2" Trailer Hitches part #SHP2061, the sleeve is held in place with friction (the force applied to the ball mount inside the receiver via the wedge bolt and hitch bolt). It's possible that the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The reason is pretty simple. The Blue Ox #BX88132 is specifically designed for flat towing and has been rigorously tested for that purpose. The Patriot Hitch #PH54FR adjustable drop receiver adapter has NOT been tested for flat towing a vehicle,…

view full answer...

Answer 7

No, its not but I have a better option. Instead of the Anti-Rattle Hitch Pin for 2" Trailer Hitches item #SHP2061, I recommend the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches item #e99007. This can be used with any 2" ball…

view full answer...

Answer 8

This is the Lets Go Aero Anti-Rattle Hitch Pin for 2" Trailer Hitches #SHP2061. We do not offer SHP359 but it is a similar design. You are correct the main difference between the two is that #SHP2061 includes the pin sleeve that helps reduce the…

view full answer...

Answer 9

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 10

You will need to use the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long #126B2. Replacement bolts for the #MR46ZR are not available so this is the only option.

view full answer...

Answer 11

We can get you set up with the trailer hitch receiver, wiring harness and brake controller you need for your 2018 Mazda CX-5, starting with the hitch, and for that I recommend the Draw-Tite Trailer Hitch Receiver #76138. I prefer the Draw-Tite over…

view full answer...

Answer 12

Since the pinhole on the shank of the Curt 30x50 Cargo Carrier #C18113 is not threaded, a locking hitch pin is what you need to lock the carrier. If you are looking for a locking hitch pin to protect your carrier from theft, the perfect fit is the…

view full answer...

Does Anti-Rattle Hitch Pin # SHP2061 Come with Bushing

Product Page this Question was Asked From

Continue Researching