Hitch Extender Availability that Has Step at End of Tube

Question

Question:

Put in a search and can not find this unit. The one Mike is showing in his video. Does it exist? How much? Thanks

asked by: Mike L

1

Helpful Expert Reply:

I wish we still had the step that Mike shows in the demo video you referenced. At this time the most similar option we have would be the part # 3371804017. This is an 18 inch hitch extension that has a step on the end of it.

expert reply by: Jameson C

1

Answer 1

While the Carpod Walled Cargo Carrier #M2205 does feature a robust 450 pound weight capacity, I can't recommend standing in or using it as a step. It may be able to hold the weight of a person but it's still going to be relatively unstable…

view full answer...

Answer 2

We do have the passenger side Optronics ONE Series LED lamp. The part #is STL008RB.

view full answer...

Answer 3

While keeping in mind that all hitch adapters for a 2 inch receiver are going to reduce the towing capacity of your hitch, I recommend the Buyers Products 18 " Hitch Receiver Extension with Step #3371804017. This extender is the longest for a 2…

view full answer...

Answer 4

Yes, you can use the Hidden Hitch Ball Mount item #80232 with the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long item #HE18. Using this hitch extender will however reduce the capacity of the hitch on your 1999 F-350 by 50%. I…

view full answer...

Answer 5

We do have a few options you can choose from but it is worth noting that a hitch extender will reduce the overall weight capacity of the trailer hitch on your 2017 Ram 1500. I recommend either using the Brophy 18" Extender with step#ST18 or the…

view full answer...

Answer 6

Yes, you can use a hitch extender like the Buyers Products Hitch Extender #3371804017 on your truck to carry a cargo carrier. This particular extender reduces receiver capacity by 1/3rd of its maximum capacity and will extend the receiver 18".…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Hitch Extender Availability that Has Step at End of Tube

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching