Diameter of 4.80/4.00-8 Trailer Tire

Question

Question:

What is the height of a 4.80x8?

asked by: Don G

0

Expert Reply:

A 4.80/4.00-8 trailer tire such as the Kenda # AM10002 and Kenda # AM10004 is 16.1" when it is inflated; the tire also has a width of 4.6".

The Kenda # AM10002 is a load range B tire with a maximum capacity of 590 lbs at 60 psi while the Kenda # AM10004 is a load range C tire with a maximum capacity of 745 lbs at 90 psi.

expert reply by: Kyle S

0

Answer 1

I currently see you have the 4.80/4.00-8 size tire on your Titan cart. The only tire we have for that size is a Trailer Tire #AM10004. This tire is 16.1" in diameter and 4.7" wide. Here is a list of some golf cart tires you may be able to…

view full answer...

Answer 2

Absolutely! To replace the 4.80-8 tires on your trailer I recommend going with the Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C #AM10004 which have a load rating of 745lbs per tire at 90 PSI so you will have no issues with your trailer…

view full answer...

Answer 3

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

view full answer...

Answer 4

The 4.80/4.00x8 tire size is the same as a 4.00X8 tire as long as the load range is the same. The Kenda K371 Bias Trailer Tire, item #AM10004, is a load range C tire. The 4.00 is included in the tire description so those who have the older, no longer…

view full answer...

Answer 5

Most likely the recommended tire pressure for the Load Range C 4.80/4.00-8 tire you have is 90 psi. However, you should check the print on the side of the tire as the max pressure should be listed there. It is important to always have trailer tires…

view full answer...

Answer 6

When you select new special trailer (ST type) tires for your pontoon boat trailer you first want to ensure you choose replacements that can handle the weight of the fully loaded trailer, and second, tires that provide enough clearance in the fender…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 12

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Diameter of 4.80/4.00-8 Trailer Tire

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching