Is Dexter Trailer Idler Axle Beam with EZ-Lube Spindles Available
Question:
Would like a price on the axle. Hub face is 74 and 64 1/2 center to center. Its a 2200 rating
asked by: Brad
0
Expert Reply:
While we do not have any axles with those measurements, we have one that is close, the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258 which has a hub-face-to-hub-face length of 72" and spring-center-to-spring-center length of 58". You can find the prices of all products directly on the product page.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1-EZ Review
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Video: Redline Trailer Suspension 126B2 Review
- Video: Dexter Axle Trailer Axles K71-707-01 Review
- Video: Review of etrailer Trailer Leaf Spring Suspension - 3 Leaf Double Eye Spring 2500 lbs Axle - e66SR
- Q&A: Grease is Leaking From the Back of the Hub at the Seal Rather than at the Front
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Westlake ST175/80R13 Radial Trailer Tire w/ 13" Black Mod Wheel - 5 on 4-1/2 - Load Range C
- Search Results: 5 lug trailer wheel
- Q&A: Hub Recommendation to Replace Hub with L44649 Bearings
- Q&A: How To Find Correct Bearing Kit for a Bass Tracker Trailer
- Q&A: Replacement Hubs for 91 Bass Tracker Tournament TX Trailer with 5 on 4-1/2 Bolt Pattern
- Q&A: How to Determine Square and Round Tube Axle Capacity
- Q&A: What Info Is Needed to Pick Out Axle Replacement for Trailer
- Q&A: Should Axles be Aligned with the Tongue or Frame on Trailer with Tongue that was Welded Off-Center
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Shop: Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1 Review
- Search Results: 25580
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: lug nut
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Wiring Diagrams
- Search Results: l44649
Explore Expert Info
![Our Expert]()
on Trailer Suspension Parts
on Trailer Suspension Parts
