RV Porch Recommendation with Platform 20-1/2 inches Tall

Question

Question:

My neighbor needs a 4 step totaling 21 high she wants 5inch rise, is there such a bird?

asked by: Ferd F

0

Expert Reply:

The closes match we have to what you mentioned is the Econo Porch Trailer Step part # EHS-102-R-HR which is a three-step porch that has a platform height of 20-1/2 inches. Only downside is that the rise between steps is 7 inches and not 5 like you mentioned wanting.

expert reply by: Jameson C

0

click to enlarge

Answer 1

If you wanted to remove the hand rail of the part #EHS-102-R and install it on the left side you could. The replacement hand rail part #SP5110-HR is designed as either a replacement handle or for installing on the opposite side as well.

view full answer...

Answer 2

Yes, the Replacement or Additional Handrail for Stromberg Carlson Econo Porch Trailer Steps part #SP5110-HR does come with the hardware that you will need to attach it to the Econo Porch Trailer Step with Handrail and Landing part #EHS-102-R. I spoke…

view full answer...

Answer 3

The folding/unfolding process of the Econo Porch Trailer Step #EHS-102-R-HR is pretty simple once you get the hang of it. It does require installing/removing screws in order to setup/collapse. I went ahead and attached a diagram that shows the…

view full answer...

Answer 4

In regard to the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part #FOS05TASF, the diameter of the ball on the suction cup mount (Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System part #FR79SR)…

view full answer...

Answer 5

Although we do not offer that exact replacement fan motor for the Everchill Refrigerators you can use Valterra FridgeCool Automatic Exhaust Fan Item #A10-2618VP which is a universal fit motor and will work with any refrigerator.

view full answer...

Answer 6

The Econo Porch Trailer Step #EHS-103-R-HR that you referenced weighs 83 lbs. It has a weight capacity of 350 lbs. I attached a link to a review video for this for you to check out as well.

view full answer...

Answer 7

While we do not have a 3-step solution with a removable handrail like the one you have pictured, we do have a 4-step solution that could work on your clinics. That is the Victory Step Manual Fold-Down Steps for RV and Toy Hauler Patios #LC726895. The…

view full answer...

Answer 8

It seems like you have the ADTH 1RV-200 Motor which has a capacity of 6,500 lbs. You can use this replacement motor #LC142178 which has a 4" on center mounting hole spacing. This one is a bit heavier duty than your other which could prevent it…

view full answer...

Answer 9

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 10

The E1 error code on Hopkins brake controllers indicates that a trailer is not connected. If you do not have a trailer connected it will continue to display E1. If this happens when a trailer is connected then that could indicate a problem on the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...