Brake Controller Recommendation for 2016 Mazda CX-5
Question:
Wondering about a transmission cooler for the above mentioned SUV. My tent trailer is 1400 lbs dry and about 1800 lbs when loaded, ALso, the brake controller woudl i need?
asked by: Shane J
Expert Reply:
For a transmission cooler for your 2016 Mazda CX-5 there isn't an option as your transmission does not allow an aftermarket cooler to be installed.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.
You will need to start with a 4-way (if you do not have one). For that you would want the # 118563.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Which Hitches are Made in the USA
- Q&A: Recommended 2-Inch Trailer Hitch For 2024 Mazda CX-5
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: Mazda CX-5 Signature Hitch Installation and Trim Removal
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 2024 Mazda CX-5 Trailer Hitch and Wiring Recommendations with Mounting Brackets
- Q&A: Is Trimming Required to Install the etrailer Hitch # e98902 on My 2021 Mazda CX-5?
- Article: My Trailer Hitch Doesn't Fit
- Article: Roof Rack Information
- Article: How to Measure for Trailer Hitch Drop