Length of Trailer Based Off of VIN

Question

Question:

looking at a 2012 RVRI trailer ***09*** by the vin what is the length and model # please. Thank you

asked by: Dan J

0

Expert Reply:

If you check out the attached photo you can see that the digits in the 6 and 7 spots indicate the length of the trailer. Your VIN has 09 in those positions so I would have to say that the trailer is 9' long.

Unfortunately there is no way for me to tell you what model your trailer is. If you call the trailer manufacturer they should be able to help you out with that.

expert reply by: Jon G

0

click to enlarge

Answer 1

Your Dometic 57915.531 is a 13.5k BTU AC unit which the Advent Air RV AC Unit #ACDOM135 is the same size and is also designed to replace Dometic units.

view full answer...

Answer 2

Hi Charles, I recommend the High Pointe RV Convection Microwave - Black #HP99ZR or Stainless Steel #HP49ZR. These convection microwaves are 20-1/2" wide x 14-3/4" tall x 18-11/16" deep so you should be able to just squeeze…

view full answer...

Answer 3

The closest option we have in size to the High Pointe EM925RWW is the High Pointe Standard RV Microwave #HP39ZR. This microwave is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep and can also be purchased in stainless steel…

view full answer...

Answer 4

We still haven't and I wouldn't hold my breath waiting to find out. Most of the time when customers try out stuff they don't end up letting us know if it ended up working out or not. I'd suspect no though. I recommend…

view full answer...

Answer 5

There are quite a few trailer light assemblies that use the mounting bracket as the ground. This works because the mounting brackets typically get attached to metal surfaces that touch the trailer frame which is where the ground strap of the…

view full answer...

Answer 6

The Lippert 2" Trailer Hitch Receiver part #LC730647 is specific to Vanleigh 5th Wheel Trailers. If you take a look at the attached photo you will see that there are tabs on this trailer that sit below the frame and the trailer hitch attaches to…

view full answer...

Answer 7

Currently it appears Roadmaster only offers rear sway bars for your 2021 Newmar Baystar 3014 class A RV motorhome. Your Baystar is on the 20,500lb GVWR Ford F-53 chassis. The 1-3/4" Roadmaster Rear Anti-Sway Bar #RM25VR is the stiffer option and…

view full answer...

Answer 8

Based on what we could find, the AL-KO 8490 is a 3,500 lb axle, and your info stating the 5 on 4-1/2" bolt pattern and 10" x 2-1/4" drum size supports that as well. I do recommend verifying what you need by taking apart your current…

view full answer...

Answer 9

The first and easiest thing you should check is that the trailer is being towed level. If the trailer is nose high or low that can cause the equalizers to not sit level. You will need to select the correct rise/drop ball mount so that the trailer…

view full answer...

Answer 10

Shackle links can flip when the trailer is unloaded since there isn't enough weight to keep them in proper position, and while a new, shorter equalizer may help, the easiest thing to check is the shackle links. Shackles that are too short can…

view full answer...

Length of Trailer Based Off of VIN

Product Page this Question was Asked From

Continue Researching