Availability of Replacement Thule Shut Tite Hitch Lock Housing

Question

Question:

looking for part # 753-3725

asked by: Jack

0

Expert Reply:

Sounds like you are looking for the replacement lock housing for Thule Snug Tite Hitch Locks part # 753-3725-02.

expert reply by: Jameson C

0

Answer 1

We have exactly what you would need. You would want to get the replacement Lock Housing for Thule Snug Tite Hitch Lock part #753-3725-02, and then also get the Replacement Lock Cylinder #THLOCKN102. The replacement lock core will slide right into the…

view full answer...

Answer 2

For a 2013 Camry, you'd want to use the Draw-Tite Class II, part #36540. This hitch will fit a vehicle with a dual exhaust. The #36416 hitch you referred to is a fit for the 2007-2011 Camry, so it won't fit your 2013 model.

view full answer...

Answer 3

If you have a 2-bike Thule Apex bike rack part #TH9024XT it actually can fit 1-1/4 inch hitches as well as 2 inch hitches. For your 2008 Toyota Camry there are only 1-1/4 inch hitch options like the Draw Tite #36416 since it's a smaller vehicle.…

view full answer...

Answer 4

For your 2011 Lexus ES 350, the only available hitches are Class II 1-1/4 hitch receivers. Technology has advanced where 2" hitches are being designed for newer models, but for your vehicle, a Class II is as good as it gets. The only solution…

view full answer...

Answer 5

In order to remove a Thule lock core you first need to make sure it is unlocked by the key that matches it. Then you will need to use the larger universal key which should have been included with your bike rack; if you don't have one then you can…

view full answer...

Answer 6

I have the perfect rack for you. The Saris SuperClamp EX part #SA4025F can fit fat bike tires, can fit small kid sized tires like what you have and also only touches the bikes at the tires. It's also very lightweight at 35 lbs. Check out the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

Hey Richard, for your 2011 Toyota Camry LE V6 with the dual exhaust, I actually recommend the Draw-Tite Hitch #36416. This hitch was designed with the dual exhaust models in mind, and we have had many customers report back to us that it will fit the…

view full answer...

Answer 12

Hello Richard. We do have an adapter, the Brophy Hitch Adapter #HT5R which may work very well for you. This will go in to the 1-1/4" receiver on your Camry and give you a 2" receiver with 5" of rise. It is very important to note that…

view full answer...

Availability of Replacement Thule Shut Tite Hitch Lock Housing

Product Page this Question was Asked From

Continue Researching