Hitch Cover for a 2-1/2 Inch Receiver

Question

Question:

Ive been looking for a hitch cover for my 2013 Ram Lariate Longhorn edition but can not find one for a 2 1/2inch receiver. Do they make them?

asked by: Bruce

1

Helpful Expert Reply:

There are hitch covers for 2-1/2 inch receivers but they're not all that common. At least not yet. We carry one, part # C22277.

expert reply by: Charles S

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

I checked with B&W and their Trailer Hitch Receiver Lock for 3" Hitches item #BW23FR doesn't have a maximum capacity listed because it is rated for a shear strength much higher than the capacity of any 3" receiver and ball mount on…

view full answer...

Answer 6

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…

view full answer...

Answer 7

I really like the etrailer Trailer Hitch Receiver #e44AR for your 2024 Honda Passport because it's the only option with a matte black finish that not only looks better, but is also more durable than the classic glossy black we see on the other…

view full answer...

Answer 8

I do have some direct equalizer upgrade options for you, but the Road Armor Shock Absorbing Equalizer Kit #LC696740 won't work unless you get longer shackle straps, but even then if you already have 3-1/8" long shackles you won't be able…

view full answer...

Answer 9

Both adapters will fit the puck system in your 2023 Ram 2500. The #C16022 is designed to work only with Curt brand sliding fifth wheel hitches like the #C16541. The #C29BR is more of a universal adapter and can be used with both sliding and fixed…

view full answer...

Answer 10

The lock plug for the Rapid Podium Feet for Thule Crossbars #TH460R has been discontinued, unfortunately. So, your only option is to use their lock cores #TH450400 to secure your feet.

view full answer...

Answer 11

The Curt Trailer Hitch Receiver part #C13416 which is a fit for a 2021 Toyota RAV4 will limit operations of the hands free liftgate feature. In most cases it is still operational but it will take a few more tries to activate the sensor than normal…

view full answer...

Answer 12

The Replacement Square End Cap #853-5826 should work perfectly for you. I went out and measured one and found that it's overall diameter is 2 inch by 2 inch and the inner tube piece measures a tiny bit over 1.75 inches by 1.75 inches so it would…

view full answer...