How Much Does the Curt Roof Mounted Cargo Basket Part # C18115 Weigh

Question

Question:

What is the weight of the basket itself?

asked by: Sandy

0

Expert Reply:

The Curt Roof Mounted Cargo Basket part # C18115 weighs approximately 29 lbs. It is 41-1/2" long x 37" wide x 4" deep and has a weight capacity of 150 lbs though you will want to consult your owner's manual for the vehicle's roof weight capacity as the lower of the two will be your limiting factor. Please also keep in mind that the crossbars on your vehicle will need to be spaced 15", 22", or 29" apart on center in order for the cargo basket to work. If you need a cargo net for this basket then I recommend part # C18200 but if you need a cargo bag for this basket then I recommend part # C18220.

The Curt Roof Mounted Cargo Basket part # C18115 will also only fit crossbars up to 3" wide x 1-5/8" tall. If you plan to be installing this basket on a 2015 Nissan Xterra with a factory roof rack which is the vehicle you entered into our fitguide then this basket will more than likely not work for you due to the larger size of the factory crossbars. If this is the case then I recommend using either the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket part # Y07080 or the Thule Canyon XT Roof Cargo Basket part # TH859XT-8591XT as we have been told they will work with the larger factory crossbars on a Nissan Xterra.

I have attached review videos on each of the above cargo baskets for you as well.

expert reply by: Conner L

0

Answer 1

In my research, I could not find standard specifications for crossbars when I looked in the Xterra's owner's manual. We have a Xterra in our shop today, and when I measured the crossbars, I agree with you that they seem to be approximately…

view full answer...

Answer 2

I spoke with my contact at Thule and they confirmed that the Thule Canyon Roof Cargo Basket #TH859XT that you referenced will be a fit for your 2006 Nissan Xterra with factory crossbars. Because of the width of this cargo basket, it will likely sit…

view full answer...

Answer 3

There are some rooftop cargo baskets that can mount to your roof side rails without the need for crossbars. Surco offers their 60 x 50 x 5 inch #SPS5060-1101, which weighs 34 lbs, and the 50 x 45 x 5 inch version #SPS4550-1101, which weighs 32 lbs. I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Tami, so since your 2021 Toyota Highlander has the flush mount rails, your only option for adding a cargo basket will be to first add a roof rack with crossbars. I suggest going with a Rhino Rack Aero Bar roof rack, which will consist of the…

view full answer...

Answer 6

Hey Erik, thanks for reaching out! We can definitely get you to the #ETBC7 kit building off of your Curt Trailer Connector Adapter #C57672. What you need is the Wiring Kit #5506 which has everything else in it aside from the circuit tester. If you…

view full answer...

Answer 7

I called my contact at Aries Automotive and they informed me that the Aries Grille Guard part #AA2065 MAY interfere with the birds-eye-view monitoring system on your 2017 Toyota Rav4. Unfortunately, there is not a defiantly answer for you that was…

view full answer...

Answer 8

Best option for the front that we offer is a grille guard like part #AA2065 which is a fit for your 2018 Toyota RAV4 as it's designed to protect the front of the vehicle. Then for the rear a trailer hitch like the etrailer part #e98864 would work…

view full answer...

Answer 9

Yes, you will need to remove the rear bumper on your 2024 Subaru Outback Wagon to install the etrailer Trailer Hitch Receiver #e25TR. This is becoming a pretty common thing as vehicles become more compact and streamlined while the demand for the…

view full answer...

Answer 10

I reached out to Lippert and your 346005 control module was replaced with the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED. To use this control module they said you must have the Control Panel #LC421484 otherwise…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...