Available 89-Inch Trailer Axles and Spring Seat Spacing
Question:
I have a 1988 Trac Air 9950 gross weight 89inch axle spring center is 76 I need an axle for this Can you help me out?
asked by: Mike
Expert Reply:
All of our axles that have an 89-inch hub face spacing (see diagram, please) also have a spring center spacing of 74-inches. None of our axles has a 76-inch spring center spacing; the nearest ones are either 74 or 78-1/4-inches apart. But we can still help you with a new axle.
You can refer to the linked page to see all of our axles. First select the weight rating of the axle you need. Our 89-inch axles such as # 8327830 are rated for up to 6K. Since you need spring seats in alternate positions all you need to do is have a pair of # TRSS300 welded on.
You will also want to note the bearings in your hubs since they will fit only a specific spindle. You will want to select an axle with spindles that use your same bearings; this will ensure your hubs will fit the spindles on the new axle. The linked article on bearings shows you the most popular ones based on axle weight capacity.
Products Referenced in This Question
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 6,000 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs
- Search Results: hub
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Rust-Resistant 5-Leaf Double Eye Spring for 6K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Q&A: Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 3500 lb spring
- Search Results: leaf spring
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Q&A: Upgraded Equalizer and Replacement Leaf Springs for 2020 Grand Design Transcend 27BHS
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Search Results: equalizer
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
- Search Results: leaf springs
- Article: Trailer Tire Sizing
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Search Results: 25580
- Q&A: What Are the Torque Specs for Trailer Suspension Parts
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
on Trailer Suspension Parts
