bing tracking image
Q & A Icon

List of Parts Needed to Flat Tow a 2019 Jeep Cherokee Trailhawk Behind an RV  

Question:

I bought a 2019 Jeep Cherokee Trailhawk, and had the dealer install the flat tow wire harness. Is this what I need to make the turn signals work during flat tow, or does it have a different purpose?

0

Expert Reply:

Mopar wiring harness 68321424AB is used if you experience shaking or bouncing of the 2019 Jeep Cherokee when you are flat towing it. I am not sure what exactly it does or why using this harness solves those issues but that is its purpose. It has something to do with the steering wheel lock.

To flat tow your 2019 Jeep Cherokee Trailhawk you will also need base plates, a tow bar, safety cables, lighting, and supplemental braking.

Base plates # RM-521451-4 (excludes models with active air shutters)
Tow bar # RM-522 (non-binding rated for 6,000 pounds)
Safety cables # RM-645 (straight cables fit in safety cable channels on tow bar)
Lighting # RM-15267 (since the vehicle has combined turn signals and brake lights only 4 diodes are needed)

You may also need a high/low adapter to keep the tow bar level. I have linked a help article showing how to measure and a link to the high/low adapters we carry.

And finally, most states now require supplemental braking on the vehicle being flat towed. One of the preferred systems for our installers and what I recommend is the SMI Stay-IN-Play DUO proportional system, # SM99251. It will apply the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.

expert reply by:
0
Michael H

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>