Will the Draw-Tite # 76112 2015 Fit Bumper on a Toyota Sienna LE Sport Edition

Question

Question:

2015 Toyota Sienna LE Sport Edition I have the sport edition and the bumper is a bit lower profile. Can you let me know if this 76112 is compatible?

asked by: Lisa

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 76112 is confirmed to fit all models of the 2015 Toyota Sienna including your LE Sport Edition.

If you check out the picture I attached you can see that a customer was able to install it on their Sienna SE without a bumper clearance issue.

Let me know what you will be using the trailer hitch for and I can make additional recommendations if necessary.

expert reply by: Jon G

0

click to enlarge

Answer 1

Sure thing! I'm attaching the exhaust hanger article to this answer page for your reference so you can get this issue fixed for your Draw-Tite Max-Frame Trailer Hitch Receiver #76112 installation on your 2020 Toyota Sienna. Bending the exhaust…

view full answer...

Answer 2

When we installed the Curt hitch part #C13343 on a 2017 Toyota Sienna just like yours we found that from the top of the top of the hitch opening down to the ground measures 13 inches and then from the hitch pin hole out to the furthest point out on…

view full answer...

Answer 3

While it is unlikely that etrailer trailer hitch #e93KR will interfere with the hands-free hatch sensors on your 2018 BMW X1 there is still the possibility that it will limit functionality of it. This means that the range the sensors can see can be…

view full answer...

Answer 4

I recommend using the Curt #C13343 which is a Class III hitch that offers a concealed cross tube for a clean looking installation that keeps the hitch mostly hidden. I really prefer the Curt hitches because of the durable powder coating they have…

view full answer...

Answer 5

We do have a nice selection of Class III trailer hitches available that are confirmed to fit your 2016 Toyota Sienna. All of the hitches will mount to the same existing holes on the Sienna's frame, so the ground clearance measurements between the…

view full answer...

Answer 6

I am sorry to hear that the tailpipe on your 2020 Toyota Sienna XLW AWD is contacting the Draw-Tite Trailer Hitch Receiver #76112 you installed. There is not a lot of space on your vehicle between where the tailpipe sits and the trailer hitch…

view full answer...

Answer 7

The Draw-Tite Max-Frame Trailer Hitch Receiver - Class III, #76112, has a shipping weight of 32 lbs. Also, this hitch has a maximum gross trailer weight capacity of 3,500 lbs and a maximum tongue weight rating of 525 lbs.

view full answer...

Answer 8

The trailer hitch receiver for the 2013 Toyota Sienna that has the most ground clearance is the Draw-Tite #76112. When we installed it the top of the receiver opening measured 12 inches from the ground. The other hitches that fit the van are mostly…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Will the Draw-Tite # 76112 2015 Fit Bumper on a Toyota Sienna LE Sport Edition

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching