Replacement T-Bolts for Yakima Mako Aero Saddles

Question

Question:

A Yakima Mako Aero Saddle T-Bolt backed out on a multi-state drive. That is the only thing missing. Can I buy at least two? Yakima Rack n Roll Trailer, bars, low-rider tower owner.

asked by: Chris A

0

Expert Reply:

We do indeed have the T-bolts you are looking for. They come in a set of 2, # 8860061.

expert reply by: Michael H

0

click to enlarge

Answer 1

I reached out to Yakima who said you can use the HandRoll Kayak Roof Rack #Y04082-2 with their LongArm Truck Bed Load Extender #Y01149. This will make loading your kayak much easier as it will roll on the extender.

view full answer...

Answer 2

The Yakima Kayak Carrier with Tie-Downs - Saddle Style with Rollers part #Y04083-04082 is designed to fit a wide variety of roof rack systems including the round bars similar to Yakima Round 48" CrossBars for Yakima Roof Rack Systems part…

view full answer...

Answer 3

The Yakima Kayak Carrier with Tie-Downs - Saddle Style with Rollers - Clamp On, part #Y04083-04082, will fit the 1-1/2" X 1-1/2" crossbars on the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs, part #A54PM. I have…

view full answer...

Answer 4

To carry kayaks with the Yakima LongArm Truck Bed Load Extender #Y01149 you need the Crossbar Pad for Yakima LongArm Load Extender #Y07417 because none of the J-Style cradles have long enough bolts for the 2" diameter of the LongArm. If you…

view full answer...

Answer 5

While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine…

view full answer...

Answer 6

I contacted the manufacturer and the bolt in the Replacement Hardware Bag for Yakima Mako Saddles, LandShark Saddles, HullRaiser or Kayak Stacker #Y8840018 are 2.5" long, 5/16-18 bolts. If you can provide me with what carrier you are needing…

view full answer...

Answer 7

For the bolt that is used to close the Replacement Front Jaw #Y8880189 for the Yakima ForkLift Bike Rack #Y02098 you need the Front and Rear Adjusting Handles #8880139 and Replacement T-Bolts #8860061. The bolts themselves are the same size; it's…

view full answer...

Answer 8

Thanks for the photo. To get that t-bolt, you may want the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031 or the Replacement T-Bolts for Yakima ShowBoat, Aero Bar, or Universal Mount Roof-Rack Accessories #8860061. Unfortunately there…

view full answer...

Answer 9

I've included an image that details the exact dimensions of the Rola Replacement Bracket, part #59506 The distance between the arms of the top bracket is 4.5 inches, and the distance between the arms of the lower bracket is about 6 inches.

view full answer...

Answer 10

The threaded portion of the u-bolts in the RhinoRack Crossbar Fit Kit, part #S280, measures 1-1/8 inches. This kit consists of 4 u-bolts, 8 plastic knobs with threaded steel inserts, 8 washers, 8 plastic caps for ends of the u-bolts, and 4 metal…

view full answer...

Answer 11

The Yakima Locking Bracket, part #Y07064 is intended for the Yakima LoadWarrior and MegaWarrior baskets, but can occassionally fit other baskets. I've included an image that provides the full dimensions of the bracket, however the ones you'll…

view full answer...

Answer 12

There haven't been any major changes to the Yakima Loadwarrior part #Y07070 since it came out in 2000 so the part #Y07064 would fit and work well. It comes with everything you would need to install it. Lock cores and keys are included as well.

view full answer...

Replacement T-Bolts for Yakima Mako Aero Saddles

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching