Is the Yakima Locking Mount Bracket Y07064 All that Is Needed to Lock a Yakima LoadWarrior

Question

Question:

Hello, Does this lock come with everything I would need for it to lock/work properly on my Yakima load warrior roof rack? I cant really tell from the pics, I purchased this rack many years ago, over 10 years, so I am not sure it would work or not? I ordered a replacement bracket recently from you, it is estimated to ship out by the end of the month, so I know I need that. I just want to be sure there is no other parts I would need, Thank you

asked by: Kc

0

Expert Reply:

There haven't been any major changes to the Yakima Loadwarrior part # Y07070 since it came out in 2000 so the part # Y07064 would fit and work well.

It comes with everything you would need to install it. Lock cores and keys are included as well.

expert reply by: Jameson C

0

Answer 1

I attached a picture of what the part #Y07064 comes with minus the keys. It basically takes the place of part of the top portion of the mounts of your Yakima Loadwarrior. The second picture I attached shows a diagram of how it works in relation to…

view full answer...

Answer 2

The Yakima Locking Bracket, part #Y07064 is intended for the Yakima LoadWarrior and MegaWarrior baskets, but can occassionally fit other baskets. I've included an image that provides the full dimensions of the bracket, however the ones you'll…

view full answer...

Answer 3

Yes, the Yakima Locking Mount Brackets #Y07064 can be used on round crossbars.

view full answer...

Answer 4

From what I was able to determine it does look like the mounting hardware from your Rola Roof Cargo Basket will be able to be replaced with the locking hardware from Yakima #Y07064. Due to the slight differences in the mounting hardware, you will…

view full answer...

Answer 5

I attached a picture that has the dimensions of the U-bolt part #CE15504A shown so that you can see the inside, center, and outside widths.

view full answer...

Answer 6

I've included an image that details the exact dimensions of the Rola Replacement Bracket, part #59506 The distance between the arms of the top bracket is 4.5 inches, and the distance between the arms of the lower bracket is about 6 inches.

view full answer...

Answer 7

According to my contact at Rola their replacement roof mount bracket #59506 can accommodate up to a 6 inch wide and 1-3/4 tall roof rack bar. Total length where the roof rack sits is 3-3/4 inches, and the total length of the u-bolt is 7-1/4 inches,…

view full answer...

Answer 8

There are indeed instructions for the HullRaiser Aero that you can use to install conversion kit #Y8860031. I will send them to you in a separate email. Also I have included a picture showing how the parts all lay out together.

view full answer...

Answer 9

There's no reason you couldn't install two extension on a MegaWarrior roof basket. You would want the extension piece part #Y07082 plus the #Y07080-82 and you would get the carrier plus an additional extension piece.

view full answer...

Answer 10

You can add more extensions to the 74" x 48" Yakima MegaWarrior Extra Large Roof Rack Cargo Basket #Y07080-82 but for each additional extension you're going to need another crossbar. Since another extension #Y07082 will put the…

view full answer...

Answer 11

The threaded portion of the u-bolts in the RhinoRack Crossbar Fit Kit, part #S280, measures 1-1/8 inches. This kit consists of 4 u-bolts, 8 plastic knobs with threaded steel inserts, 8 washers, 8 plastic caps for ends of the u-bolts, and 4 metal…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Is the Yakima Locking Mount Bracket Y07064 All that Is Needed to Lock a Yakima LoadWarrior

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching