Roadmaster Stop Light Switch Kit For 2018 Jeep JL Wrangler Unlimited

Question

Question:

The JL appears to have only micro fuses. What do I need to do for he install?

asked by: Greg O

1

Helpful Expert Reply:

The Roadmaster Stop Light Switch Kit # RM-751490 will work for your 2018 Jeep JL Wrangler Unlimited.

As you know the fuse tap does not work with the Jeep JL because it will not fit in the spot in the fuse box. All you need is a fuse holder # SWC9545 and the 10 amp fuse that comes with # RM-751490. That connection will go right to the battery.

I have a video attached that shows this product being installed on the 2018 Jeep JL Wrangler Unlimited. The part about the fuse starts at the 5:35 mark.

expert reply by: Timothy G

1

Answer 1

Thank you for your purchase from etrailer of the Roadmaster Even Brake Portable Supplemental Braking System #RM-9400 for your 2019 Jeep Wrangler. As you said, the system does require the use of both the 12 Volt Outlet Kit #RM-9332 and the Roadmaster…

view full answer...

Answer 2

The Roadmaster Brake-Lite Relay #88400 that you referenced actually isn't needed for your 2021 Jeep Wrangler with the push button start. In order to ensure proper operation of the signal lights and braking system you instead need the Stop Light…

view full answer...

Answer 3

I cannot tell you the exact "influencer" as you referred to it as but while the vehicle is setup for flat-towing, the brake light switch will shut off after 10 minutes of inactivity. If you open or close the door that will then wake the…

view full answer...

Answer 4

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 5

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 8

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.

view full answer...