Recommended Trailer Winch for 25 Foot Pontoon Boat

Question

Question:

will this work on my 25 ft sun tracker pontoon boat

asked by: Joseph

0

Expert Reply:

The Jif Marine 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs # 315-W3200D will work well with your 25 foot Sun Tracker Pontoon Boat. The only thing to consider is if you desire a longer strap, which for most trailers wouldn't be needed as you'd float more than 5 feet onto the back of the trailer prior to connection and release prior to that for launch to have adequate footing.

expert reply by: Jason S

0

Answer 1

I went out into our warehouse to grab a Dutton Lainson Winch part #DL14627 to measure the bolt hole dimensions for you. I attached a picture that has all of them listed.

view full answer...

Answer 2

From what I have found, the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs #DL14627 will match the bolt pattern of your Shelby 5407B. I have attached a diagram as well as the dimensional drawing showing the bolt pattern on…

view full answer...

Answer 3

I went to our warehouse and took the measurements on the Dutton-Lainson Trailer Winch #DL14627. The barrel diameter is 1-1/8 inches, the flange diameter is 6 inches, and the drum length is 2-1/2 inches. I am including a link to a FAQ page on hand…

view full answer...

Answer 4

Whereas the Fulton #F142400 will work with just wire rope, like the #FWC3250100, the Fulton #F142401 will work with wire rope and also a strap, like the #FWS20HD0200. With both of these having a capacity of 2,000 ponds and being high performance 2…

view full answer...

Answer 5

When picking out a boat trailer winch in general the ratio of weight capacity to boat weight is 2:1 and most 24 foot pontoons like yours are 1,200 lb so you could pretty easily get a way with a 600 lb winch. But if you have a long winching distance…

view full answer...

Answer 6

I've attached two pictures of the bolt pattern of the Fulton Winch #F142401. One shows the size of each bolt hole and the other shows the distance between the holes.

view full answer...

Answer 7

I recommend using the Fulton High-Performance 2-Speed Trailer Winch - Rope or Strap - 2,000 lbs #F142403, which would be a comparable replacement for your Fulton 542 series winch and can be used with either wire rope or a strap. For a strap I…

view full answer...

Answer 8

The bolt hole spacing as well as the bolt hole pattern is different when you compare the #DL14627 (which is the 1802A) to the #DL15440 (3200A). The overall dimensions differ as well. I am attaching some pictures showing the bolt hole measurements as…

view full answer...

Answer 9

The B78-13 tires you mention convert to metric size 175/80-13. The 175/80-13 tires are available in three load ratings. B: 1100 lb at 35 psi C: 1360 lb at 50 psi D: 1610 lb at 65 psi You would choose the load rating based on the capacity of your…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Recommended Trailer Winch for 25 Foot Pontoon Boat

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching