Recommended Trailer Coupler for Lightweight Boat Trailer  

I spoke with my contact over at Demco about coupler #12564. From the top (outside) of the coupler above the mounting holes down to the center of the mounting holes measures 1.029". What brand is the coupler you have now because the 1 inch…

Your UFP surge actuator 34043 is a model A-60 actuator. This is designed for a 2" hitch ball and trailer weighing up to 7,500lbs. I have made a list of different bolt on couplers we carry below you can choose from to bolt in place of the…

I had the Demco Channel Tongue Trailer Coupler - Zinc - 2" Ball #DM12717 measured and included a diagram with the spacing you are looking for, and a little more if needed. With that being said, from the center of the first bolt hole to the…

The hole diameters for the Demco Channel Tongue Trailer Coupler item #12564 are 1/2 inch. It is recommended to use grade 8 hardware to attach the coupler to your trailer frame. You can find these bolts at a local hardware store as they do not come…

The linked page displays all 2-inch ball couplers that bolt on to a 3-inch trailer tongue. Some do use the same 3-inch hole spacing, such as Titan #T4845000 and the Fulton #F223000301, but other hole patterns are included on some couplers, such as…

The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.

Yes, the Demco Channel Tongue Trailer Coupler #12564 that you referenced does accept a 2-inch hitch ball and mounts to a 3-inch-wide trailer tongue. It's mounting hole spacing is indeed 3-inches and it offers a 10,000-lb weight capacity.…

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…