Replacement Electric Step Control Unit for Kwikee 32 Series Steps

Question

Question:

my step # is 77679 32 series according to kwikee it takes 909510000. do you have a replacement part?

asked by: Ron C

0

Expert Reply:

Yes the Lippert Components Kwikee 9510 Control # LC379146 is the same as Kwikee part 909510000. Since that is the part that Kwikee called out for your steps # LC379146 will fit.

expert reply by: Michael H

0

Answer 1

Thank you for all of that information, I was able to use the PN:909510000 (Kwikee part number) to locate the correct replacement control unit for your steps. The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 is the correct…

view full answer...

Answer 2

The correct control unit for your 28 Series Kwikee steps is part #LC379146 on our site. This is the same control unit that is included in the Kwikee Steps Replacement Kit #LC379769 for 28, 31, 37, and 39 series steps.

view full answer...

Answer 3

According to Lipperts website you will want to replace your Series 42 step motor with the Replacement Motor for Kwikee 25 Series Electric RV Steps - 12V item #LC369506. You will need a IGML control box like the Replacement Control Unit for Kwikee…

view full answer...

Answer 4

Since we know you have power to the steps and you were able to test and determine that the motor can work in both directions that would indicate that the step assembly has a bad module which would need replacing. Since we know you have the Kwikee…

view full answer...

Answer 5

If you are currently using 909510001 then you will need #LC379605. The other one, #LC379146, is for pre-IMGL steps. IMGL stands for integrated motor/gear box/linkage. In October of 2004, Kwikee began shipping steps with an integrated motor/gear…

view full answer...

Answer 6

If your Kwikee Series 42 powered steps were made before 2005 the replacement control module is the part #LC379146 whereas if they were made after that you'd need the part #LC379604. Since your Rambler is a 2006 model you most likely have a 2005…

view full answer...

Answer 7

If you have confirmed that the motor in your Lippert or Stromberg Carlson powered RV steps is good and that there are no mechanical issues with the step linkage (that could be causing the step to sometimes stop before extending completely), then the…

view full answer...

Answer 8

I was able to determine that the switch you have now is the #LC369299 which is normally an open circuit so for the opposite configuration to allow your step to operate like it needs to you'd want the #LC301694.

view full answer...

Answer 9

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. Unfortunately, if your steps were manufactured prior to February of 1999, then there are not replacement parts available and you'd need to replace the entire step. If it…

view full answer...

Answer 10

The correct replacement door magnet for a set of Coach Steps is the Replacement Door Switch for Lippert Electric Coach Step part #LC301694 which is a normally open switch. In order to confirm you need a normally open switch, touch the two magnet…

view full answer...

Answer 11

We carry a few choices the Replacement Door Switch for Lippert Electric Coach Step #LC301694 and the Replacement Magnetic Door Sensor for Kwikee Electric RV Steps #LC369299 that you may need depending on if your circuit needs to be open or closed.…

view full answer...

Answer 12

We're familiar with this issue which happens when the incorrect switch is used. Kwikee Steps use two different magnetic switches. One is a normally open circuit and the other is normally closed circuit. The switch must match the controller.…

view full answer...

Replacement Electric Step Control Unit for Kwikee 32 Series Steps

Product Page this Question was Asked From

Continue Researching