Rocker Switch Wiring for a Superwinch Terra Series ATV Winch

Question

Question:

Need wiring diagram so I can install a rocker switch

asked by: Philip

1

Helpful Expert Reply:

The replacement rocker switch for the Superwinch Terra Series ATV Winch part # SW1145220 is the Replacement Controller for Superwinch Terra Series ATV Winch part # SW87-42609. I have attached the wiring diagram of this rocker switch for you as well.

expert reply by: Conner L

1

click to enlarge

Answer 1

I attached a diagram that shows how the Superwinch part #SW1130220 gets wired up. In it you can see which terminal you would need to run the black and red wires. Is the battery you are using fully charged? What you described is typically the sound of…

view full answer...

Answer 2

I was able to find a wiring diagram for the Superwinch ATV A3500 winch that you have. I also attached a link to the install instructions for this winch in a separate email.

view full answer...

Answer 3

For the Superwinch LT2000 ATV Winch #1120210 we currently sell that winch kitted with the upgraded switch kit. This switch kit would attach to the handle bars on your ATV that you were using the winch on. If you are talking about the hand held remote…

view full answer...

Answer 4

If you check out the attached picture you'll see a wiring diagram for the Superwinch Solenoid part #SW87-42608 that you referenced.

view full answer...

Answer 5

You can hardwire in a switch like #BDW20173 to your winch. It simply gives you a controller at a different location to assist you in using the winch. These parts have not been tested with your winch, so I can't confirm the which power specs and…

view full answer...

Answer 6

The 7-way on your trailer could be wired correctly as-is. Not all 7-ways will have wires run to every one of the pins. Typically, if there are only 5 wires you will be missing the circuits will be the 12-volt accessory and the reverse light circuit.…

view full answer...

Answer 7

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

view full answer...

Answer 8

Blue Ox has base plate kits that fit your 2023 GMC Yukon XL with the part #BLU54VR which fits the AT4 models with 4L and the part #BLU58FR which fits the non-AT4 models. While we haven't had the chance to shoot an install video for either of…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Rocker Switch Wiring for a Superwinch Terra Series ATV Winch

Products Referenced in This Question

Continue Researching