Installing Tekonsha Prodigy P3 Brake Controller on 2018 Buick Enclave
Question:
How to wire the Tekonsha P3 in my 2018 Buick Enclave Avenir?
asked by: Dick C
Expert Reply:
The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 referenced in your question is an excellent choice and exactly what I would have recommended.
There is not a built-in brake controller port on your 2018 Buick Enclave that will allow for installation with a Plug-In Adapter, however all the needed wires should already be run under the dash. In order to install the P3 brake controller, you will just need to connect the 4 wires from the controller to the 4 blunt-cut wires that will be located beneath the dash of the vehicle. On the controller, the blue wire is for brake output, the red wire is for the brake pedal signal wire, the black wire is for 12V power and the white wire is for ground.
There should be a 7-Way connector already installed at the rear of your Enclave. If for some reason it is not present, you can use the T-One Vehicle Wiring Harness # 118287. This is a simple, plug-and-play installation that will connect directly to the built-in plug located under the vehicle, on the driver's side.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Shop: Towing Mirrors
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Video: Trailer Brake Controller Installation - 2015 Buick Enclave
- Shop: Vehicle Tow Bar Brake System
- Search Results: 3026~p
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Q&A: Backup Light Recommendations for a Enclosed Utility Trailer
- Q&A: Cooler Options to Prepare 2011 Buick Enclave CXL for Trailer Towing
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Shop: HitchGrip Carrying Tool for Weight Distribution Head Assembly with 2-5/16" Ball
- Shop: Reese Weight Distribution System w Shank - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Shop: ProPride 3P Weight Distribution Hitch w/ Sway Control for 2" Receivers - 14K GTW, 1.4K TW
- Shop: Transmission Cooler
- Search Results: towing mirrors
- Search Results: mirror extenders
- Shop: Roof Rack
- Q&A: Should 1 or 2 Bar-Style Friction Sway Control Units be Used on a 7,000 Pound Trailer
- Video: Curt Echo Under-Dash Trailer Brake Controller Review
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Buick Enclave
- Shop: Trailer Hitch
- Video: K Source Universal Clip-On Towing Mirror Review
- Q&A: Locating Trailer Brake Controller Wiring on 2018 Buick Enclave with Factory Tow Package
- Search Results: prodigy 2 brake controller wiring harness
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Chevrolet Traverse
on Trailer Brake Controller
