bing tracking image
Q & A Icon

Parts Needed to Install Brake Controller in 2015 Jeep Wrangler Unlimited  

Question:

Does the 2015 Jeep wrangler unlimited have to be taken to the dealer for the computer system to be flashed ? once the trailer brakes components are installed ? I know on the Ford trucks this has to be done. Thanks

0

Expert Reply:

You would not need to have the computer of your 2015 Jeep Wrangler Unlimited flashed once the brake controller install components are installed.

The first thing you will want is a 7-way trailer connector at the rear of the vehicle and for this I recommend the Hopkins Endurance Quick-Install 7-Way Trailer Connector part # HM42190 which is a direct plug and play option that will not require you to cut or splice any wires/circuits. The square plug on the end of this connector will plug into and replace the 4-way trailer connector you have which is found near the driver's side taillight housing.

The next thing you will need is a brake controller and the most popular, well reviewed, and easy to use one we sell is the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. This controller gets its reputation from the easy-to-read LCD display, integrated safeguards, and 5 storable settings.

In order to install said brake controller you will also need the Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers part # 5506. This is the only part of the installation that will require you to cut/splice any wires but I have attached an installation video of this very same harness/controller on a very similar 2017 Jeep Wrangler Unlimited for reference. Unfortunately, as the Jeep does not have a factory brake controller harness this will be your only option to install a brake controller.

expert reply by:
0
Jameson C

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>