Does Malone Roof Rack # MPG201 Fit 2018 Subaru Forester with Raised Side Rails

Question

Question:

I have a 2018 Subaru Forester with factory raised rails. I want to mount a Thule 884 kayak mount. Will this be compatible with the Thule attachments made for square Thule bars?

asked by: Corey C

1

Helpful Expert Reply:

Yes, the Malone roof rack part # MPG201 that you referenced is a confirmed fit for the factory raised rails you have on the roof of your 2018 Subaru Forester and would work well with the Thule 884 rack you have as well since it's designed for square bars like this rack has.

expert reply by: Jameson C

1

Answer 1

The factory roof rack on your 2018 Forester wouldn't work well because the crossbars do not extend 4-8 inches beyond where they attach to the roof rack feet. The Hullavator needs that extra length do it doesn't contact the side of the…

view full answer...

Answer 2

Yes, the Thule Watersports Adapter part #THXADAPT11 will allow you to use the Thule Hull-a-Port Kayak Carriers on the channels inside the Malone AirFlow2 Roof Racks like part #MPG215.

view full answer...

Answer 3

We haven't had the chance to install the Curt Roof Rack for Raised Side Rails #C18118 on a 2010 Subaru Forester like yours so I can't give you the number off hand but I can give you a really easy way to determine what you are looking…

view full answer...

Answer 4

The Rola Roof Cargo Basket does weigh 58lbs which is on the heavier side. If you don't have an extra set of hands, then installing and removing this basket frequently could be troublesome. I think a better option is the Aluminum Roof…

view full answer...

Answer 5

We offer a range of roof rack kits for your 2014 Kia Sedona with factory raised side rails that can be seen on the linked page. These include various crossbar styles: square, round, rectangular and aero (elliptical). Since the Subaru OEM rack cross…

view full answer...

Answer 6

Yes, we have confirmed with Yakima that their Timberline Towers part #Y00147 are a confirmed fit for the raised side rails on the roof of your 2022 Subaru Outback Wilderness. For an HD crossbar then Yakima has the part #Y01156 as a fit for these…

view full answer...

Answer 7

The Curt Roof Rack for Raised Side Rails - Aluminum - Black - 53-3/8" Long #C18118 can be used with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading #TH898 on your 2018 Toyota 4Runner. Often people use…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Does Malone Roof Rack # MPG201 Fit 2018 Subaru Forester with Raised Side Rails

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching