Direction to Rotate Locking Ring to Secure Female RV Power Cord Connector A10-3025ED90

Question

Question:

female twist lock to male 3 prong 30 amp twist clockwise or counterclockwise to lock? thanks

asked by: Bill C

0

Expert Reply:

Female twist-lock connectors like the one on the Mighty Cord RV Power Cord # A10-3025ED90 secure by you rotating the locking ring clockwise. This black locking ring is shown in the linked review video.

expert reply by: Adam R

0

Answer 1

What's interesting about wiring is that while 30 amps might be available to a 15 amp power source using a 30 amp to 15 amp adapter like part #A10-1530DVP a 15 amp circuit wouldn't ever pull more than it was rated for so the extra…

view full answer...

Answer 2

The first thing you'll need is a power inlet to receive power from the shore power pedestal. You'll most likely only need 30amp service since you're in an enclosed trailer so I recommend the Furrion Replacement Power Inlet…

view full answer...

Answer 3

While the Mighty Cord Adapters part #A10-1530HVP and #A10-1530 are very similar there is one key difference. The wire gauge of the #A10-1530 is 10 gauge and the #A10-1530HVP is 12 gauge.

view full answer...

Answer 4

It sounds ord like you're looking for an adapter or cord that has a standard household 15-amp male connector on one end and a 30-amp female on the other. Standard household male plugs as found on extension cords are rated for 15-amp service.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 7

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 8

Hey Paul, For the stainless steel version of part #SM78VR you'll just need the SmartPlug RV TV/Internet Inlet - 2 Coaxial Connector - Stainless Steel #SM58FR. This comes with two coaxial connectors but you can always pop one out and install…

view full answer...

Answer 9

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion…

view full answer...

Answer 10

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…

view full answer...

Answer 11

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 12

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Direction to Rotate Locking Ring to Secure Female RV Power Cord Connector A10-3025ED90

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching