Does Using 15 amp to 30 amp Wiring Adapter Put Too Much Current on 15 amp Accessories

Question

Question:

Does a 30A to 15A adapter give 30A 110v? Does not seem right as the 30A 110v equipment and wiring designed for 15A would be protected by a 30A breaker.

asked by: Bob J

1

Helpful Expert Reply:

What's interesting about wiring is that while 30 amps might be available to a 15 amp power source using a 30 amp to 15 amp adapter like part # A10-1530DVP a 15 amp circuit wouldn't ever pull more than it was rated for so the extra amperage just wouldn't be used. To look at it a different way you could say that there's quite a bit of amperage available at the breaker box of your house but without anything drawing on it the power doesn't go anywhere.

expert reply by: Jameson C

1

Answer 1

Female twist-lock connectors like the one on the Mighty Cord RV Power Cord #A10-3025ED90 secure by you rotating the locking ring clockwise. This black locking ring is shown in the linked review video.

view full answer...

Answer 2

It sounds ord like you're looking for an adapter or cord that has a standard household 15-amp male connector on one end and a 30-amp female on the other. Standard household male plugs as found on extension cords are rated for 15-amp service. If…

view full answer...

Answer 3

While the Mighty Cord Adapters part #A10-1530HVP and #A10-1530 are very similar there is one key difference. The wire gauge of the #A10-1530 is 10 gauge and the #A10-1530HVP is 12 gauge.

view full answer...

Answer 4

The first thing you'll need is a power inlet to receive power from the shore power pedestal. You'll most likely only need 30amp service since you're in an enclosed trailer so I recommend the Furrion Replacement Power Inlet #431861.…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 7

Hey Paul, For the stainless steel version of part #SM78VR you'll just need the SmartPlug RV TV/Internet Inlet - 2 Coaxial Connector - Stainless Steel #SM58FR. This comes with two coaxial connectors but you can always pop one out and install an…

view full answer...

Answer 8

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 9

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 10

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 11

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Answer 12

Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace the…

view full answer...

Does Using 15 amp to 30 amp Wiring Adapter Put Too Much Current on 15 amp Accessories

Product Page this Question was Asked From

Continue Researching