What is the Diameter of the Fittings at the Ends of EZ Coupler RV Sewer Hose Kit # D04-0115

Question

Question:

What is the Outside Diameter of the fittings not including the elbow of this hose set. My storage tube can accommodate up to 4-3/8.

asked by: John

0

Expert Reply:

I measured the fittings on the EZ Coupler RV Sewer Hose Kit # D04-0115 for you. On either end the overall diameter at the widest point is 4.15 to 4.16 inches. That is a hair under 4-3/16 inches.

expert reply by: Michael H

0

Answer 1

No, the elbow won't fit but if you take it off the EZ Coupler RV Sewer Hoses w/ Swivel Lug Fittings item #D04-0115 will fit inside the Valterra RV Sewer Hose Carrier item #A04-5094BK. The fittings measure right at 4-3/16" so you'll have…

view full answer...

Answer 2

Yes, of course you can insert and glue the Valterra Rotating Adapter for Rigid RV Sewer Pipe, #T1027 if you choose to. If your objective is to have a permanent/semi-permanent arrangement of your RV to a sewer system, I suggest the Valterra Rotating…

view full answer...

Answer 3

The internal diameter of the Valterra part #A04-5094 is 4-3/8 inches. The hose part #D04-0115 that you mentioned has an outer diameter of 3 inches.

view full answer...

Answer 4

While we have an option for you, both of the hoses from the EZ Coupler RV Sewer Hose Kit - (2) 10' Long Hoses #D04-0115 will be 50 inches when collapsed, which is too long for your 4 foot bumper. You can use one of the 10 foot hoses, the EZ…

view full answer...

Answer 5

We don't sell the 4x4 inch steel bumper, we do however sell the sewer hoses that often can be stored within them like the EZ Coupler RV Sewer Hose Kit w/ Swivel Fittings and 4-in-1 Clear Adapter - (2) 10' Long Hoses #D04-0115. If you…

view full answer...

Answer 6

The inner diameter of the #A04-5094BK is 4-1/2 inches. This is the diameter of available space for storage.

view full answer...

Answer 7

There is Schedule 20 and 40 sewer pipe that has an outer diameter of 3-1/2 inches like what the Valterra Rotating Adapter for Rigid RV Sewer Pipe #T1028 is designed to work with so yes it would fit if the size was correct.

view full answer...

Answer 8

I went out to the warehouse to measure the overall depth of the Valterra Twist-On Waster Valve, #T58, for you. It has an overall depth of 5-1/16 inches. I have included a picture showing this for you.

view full answer...

Answer 9

The brackets of the Valterra EZ Hose Carrier #A04-5094BK that you referenced are built into the end caps of the carrier so they are not adjustable.

view full answer...

Answer 10

The Replacement Cap for EZ Coupler 4-in-1 RV Sewer Adapter with 90-Degree Elbow Fitting part #F02-3107 is designed to be used with the 90 degree clear plastic adapter that comes with the EZ Coupler RV Sewer Hose Kit part #D04-0115.

view full answer...

Answer 11

It is completely within the realm of possibilities that the actuator has become disconnected from the gate internally causing the valve to not open. The Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3"…

view full answer...

Answer 12

There are several materials you can use to fill the gap between your shower wall and shower pan, the Better Bath RV Shower Pan part #LC210377. These materials include but are not limited to acrylic (most common), laminate, tile, ceramic etc. That…

view full answer...

What is the Diameter of the Fittings at the Ends of EZ Coupler RV Sewer Hose Kit # D04-0115

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching