How to Select Idler Hub to Replace Dexter Hub/Drum Assembly
Question:
I have a dexter 8-155 hub and want to replace with just a simple hub... no brake drum
asked by: Brian
Expert Reply:
You can certainly replace a Dexter hub/drum with a non-braking idler type hub. You'll need to match up the set of bearings. The idler hub needs to use the same inner and outer bearing parts in order to fit on your spindles. The linked photo shows how those bearing numbers appear.
You'll also want to confirm your wheel bolt pattern so that your wheels will bolt up easily. The linked article will help with that.
The other linked page will show you all idler hubs. Just click on your bolt pattern and the weight rating for your axle (usually on a sticker on the axle itself) and you'll then see only the hubs that will fit your spindles and that have your correct bolt pattern.
For instance, for a 5-on-4-1/2 bolt pattern idler hub rated for a 3500-lb axle you could use # AKIHUB-545-35-K so long as your bearings are # L68149 and # L44649 .
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dexter 8 250
- Search Results: axle spindle nut
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Q&A: Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Search Results: dexter 3500
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: D Washer for EZ Lube Spindles
- Shop: D Washer for Spindle, 6K-8K Axles - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Spindle Nut 1"
- Q&A: Determining Correct Replacement Bearings and Seals for 6,000 Pound Axles
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Search Results: 25580
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?