Does Thule Replacement Lid Lifter # TH14936 Fit Both Left and Right Hand Side

Question

Question:

I am buying two lid lifter hinges. I do not see that they are left and right, but arent they different? I would like one of each one is broken in my ski box and I want to replace both. THanks

asked by: Ian S

0

Expert Reply:

The Thule Replacement Lid Lifter Hinge # TH14936 that you referenced can fit on either the left or the right hand side of a cargo box. They are "ambidextrous". On one side they fold in and when on the other side the fold out.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact over at Thule and found that the original strut for the Weekender cargo boxes is no longer available. But I have good news. You can use replacement strut #TH14936 instead!

view full answer...

Answer 2

The difference between the Thule hinges or struts #TH14936 and #TH14933 is the spring tension. Both of these hinges will work for your Sears X Cargo Sport 20 lid. However, the #TH14936 includes better springs.

view full answer...

Answer 3

Installing a replacement hinge or strut on your Thule rooftop cargo box isn't complicated, but it does take some force. I have added a link to a video showing how to do this, and you can forward to about the 1:30 part to get to the nitty…

view full answer...

Answer 4

Thule lists replacement dual force strut TH14933 as the correct replacement for the Thule Weekender series of cargo boxes. This is the strut used for many Thule cargo boxes. The only other option is #TH14936 which is not listed as the correct part…

view full answer...

Answer 5

Since we know the Odin roof boxes are rebranded Thule boxes the lid lifter you are looking for is the part #TH14936 that you referenced.

view full answer...

Answer 6

We do offer a replacement Spring Hinge for the Sears X-Cargo Sport-20 rooftop boxes, part #TH14933. The part #TH14936 you referenced is not an ideal fit for your Sears X-Cargo Sport-20 due to the stiffness of the spring.

view full answer...

Answer 7

I have a great solution for you. Unfortunately, I confirmed with Thule that the Replacement Lid Lifter Hinge for Thule Cargo Boxes #TH14936 is not compatible with the Thule Motion XT XL #TH629806. However, the part that you need is the Replacement…

view full answer...

Answer 8

Thanks for the picture! The Thule replacement part you referenced item #TH14936, is the correct replacement hinge for your Atlantis 1800XT Cargo Box. It is also the replacement hinge for all of the Thule Evolution, Ascent, and Atlantis Series Cargo…

view full answer...

Answer 9

The distance between the mounting brackets of the SportRack Cargo Box part #SR7018 is 33-9/32 inches.

view full answer...

Answer 10

The Replacement Lid Lifter Hinge for Thule Cargo Boxes part #TH14936 has a ball/socket joint design so it is very easy to install, it simply snaps in place via friction with the ball on the cargo box. There is no cutting, drilling, or tools required.…

view full answer...

Answer 11

I went down to the warehouse to measure the distance between the holes of the Replacement Quick On/Off Bracket #TH04973 and found from center to center it was 4 inches. I used digital calipers to ensure the accuracy of this measurement. Just between…

view full answer...

Answer 12

To mount your older Thule Alpine Cargo Box onto the factory crossbars of the 2017 Chevrolet Suburban you can use the Replacement QM3 Hardware #TH04997. You will need to drill some new holes in the cargo box but the QM3 includes stick on hole covers…

view full answer...

Does Thule Replacement Lid Lifter # TH14936 Fit Both Left and Right Hand Side

Product Page this Question was Asked From

Continue Researching