Troubleshooting Weak Ground on 2004 Silverado and Trailer Wiring
Question:
Hi I have a 2004 silverado that i do tow with all the time. I’m experiencing a problem with my trailer lights for the first time. When I turn my headlights on in the truck with the trailer connected, my trailer tail lights just stay brightly lit like I’m applying the brakes but I’m not. When I shut my trucks headlights off all lights on the trailer proceed to work properly with no problems whatsoever. Doesn’t matter if the trucks engine is off or on either just when the headlight switch is turned on and off. What could make my trailer lights stay in the brake applied position when my headlights are on but everything work fine when my headlights are off. I’m stumped
asked by: Christian K
Expert Reply:
No worries. What you describe sounds like the classic case of a bad ground. Because vehicle headlights use a fair bit of power and remain on continuously (rather than blink) they often are the lighting function that causes a weak ground connection to reveal itself.
Find the main ground wire from the truck's trailer connector and find where it attaches to the truck metalwork. You may need only sand off this grounding point so that you can re-attach the ground wire to clean bare metal. Often that is all that is needed. The new clean ground can be protected by applying dielectric grease like # 11755 which will block water and dirt that could again lead to a connection issue. You can do the same thing on the trailer main ground wire too.
Product Page this Question was Asked From
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Troubleshooting Ground on Trailer Wiring on 2004 Chevy Silverado 2500 HD
- Q&A: Electric Brake Terminal on 7-Way Connector is Showing Constant 12 Volts Under All Conditions
- Q&A: Wiring For 7-Way Connector on 2004 Chevrolet Silverado 2500
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Trailer Wiring
- Video: Trailer Connector Socket Installation - 2004 Chevrolet Silverado
- Q&A: Troubleshooting 7-way Connector On 2004 Chevrolet Silverado Where All Pins Have Constant Power
- Search Results: led lights
- Search Results: led trailer brake light
- Shop: Optronics Load Resistor for LED Lights - Male PL-3 Plug and Female PL-3 Plug - Qty 1
- Shop: Buyers Products Anti-Flicker Harness for Turn Signals - PL-3 With Male And Female Plugs
- Shop: Optronics Load Resistor for LED Lights - Male PL-3 Plug and Pigtail - Qty 1
- Article: Trailer Wiring Diagrams
- Q&A: Wiring Diagram Needed for Installing a 7-Way on a 2005 Chevrolet Silverado
- Q&A: 7-Way, Vehicle End, Trailer Connector Wiring Diagram
- Q&A: 7-Way Trailer Wiring Harness Recommendation for a 2004 Chevy Silverado 2500HD
- Shop: Reese Multi-Plug Wiring Harness for Factory Tow Package - 7-Way and 4-Way Flat Trailer Connectors
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Dielectric Grease Review
- Video: Hopkins Trailer Connector Socket Installation - 2003 Chevrolet Silverado
- Video: Curt 4-Pole Flat Trailer Connector Mounting Bracket Review
- Video: Pollak 7-Pole, RV-Style Trailer Wiring Harness Installation - 2000 Chevrolet Silverado
- Video: Pollak 7-Pole Trailer Connector Socket Installation - 2016 GMC Sierra 2500
- Video: Trailer Brake Controller Installation - 2004 Chevrolet Silverado
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Dielectric Grease for Electrical Connectors, 2 oz.
- Search Results: trailer hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
on Accessories and Parts
