How Does Lippert Components 20 Ft Waste Master Extension Kit Fit to Other Sewer Hose

Question

Question:

Is there a cup let that comes with the second 20 ft hose too fit the first hose?

asked by: Ellen L

0

Expert Reply:

The Lippert Components 20 Ft Waste Master Extension Kit # LC360784 that you referenced does come with a union piece that connects it to the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long Item # LC359724. I attached a picture of it for you to check out.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, the camlock that is included in the #LC359724 will glue to your current sewer outlet with a few simple steps. First, remove the cap from your existing fitting. Use a hacksaw to cut off the exterior bayonet tabs and then smooth the surface with…

view full answer...

Answer 2

Since the placement of the blank waste valve handle makes it hard to operate I recommend switching out the valve with a cable actuated valve that will allow you to place the handle exactly where you need it. The LaSalle Bristol Cable-Actuated RV…

view full answer...

Answer 3

Waste Master RV Sewer Hose #LC359724 fits into an RV side using a camlock style fitting. The RV end fits over a bayonet style fitting. It sounds like that is what you have so you would not need to do any modifications since the RV end fits over…

view full answer...

Answer 4

You can leave the Valterra Clearview Extension for RV Waste Valve #T1021 installed during transit but most people remove any types of connections like this during travel to make sure it doesn't come off and start bouncing around, plus adding…

view full answer...

Answer 5

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 9

The air tank for the Demco Air Force One item #SM99243 is used to collect reserve air from your motorhome's air brake system. It ensures there's the right amount of pressure on demand to operate the actuator. Depending on what type of…

view full answer...

Answer 10

Thanks for reaching out, Steve! Both Air Lift LoadLifter 5000 kits, parts #AL47PD and #AL82WQ, fit a 2021 Ford F-150 4WD. The only difference is whether your truck has the CCD (Continuously Controlled Dampening)/Onboard Scales, or the PowerBoost…

view full answer...

Answer 11

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 12

Personally I feel like the Demco Autoslide 5th Wheel Trailer Hitch #DM8550040 is the best option for your 2021 Nissan Titan towing a 2011 Forest River Rockwood 8265WS. The Autoslide will move back up to 22-1/2" when you turn to give you the…

view full answer...

How Does Lippert Components 20 Ft Waste Master Extension Kit Fit to Other Sewer Hose

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching