Recommended Anti-Sway Bars for E-450 Chassis on 2018 Thor Vegas

Question

Question:

I just purchased a 2018 Thor Vegas 25.2. I am looking to replace the stock sway bars on the E-450 chassis. I did not find any products listed on your website. Can you help?

asked by: Kerry

0

Expert Reply:

For your 2018 Thor Vegas 25.2 on Ford E-450 chassis, the Roadmaster Rear Anti-Sway Bar for Motor Homes # RM-1139-147 and the # RM-1139-176 for the Front Anti-Sway Bar. These are the confirmed fits for the E-450 chassis with either a V8 or V10 engine and will help to stabilize your vehicle and offer you a more comfortable ride.

I've attached videos of each product to assist with function and installation.

expert reply by: Jason S

0

Answer 1

You can replace the front sway bar only on your motorhome with a 2017 Ford E-450 chassis, but the best way to enhance the ride of your motorhome is to add an aftermarket rear anti-sway bar, which are superior to OEM sway bars. After that you can…

view full answer...

Answer 2

The most worthwhile upgrade for your Forest River Forester 3011DS on a 2018 Ford E-450 chassis is an upgraded rear sway bar like the Roadmaster Rear Anti-Sway Bar part #RM-1139-147. This is also typically the first thing you upgrade on a new…

view full answer...

Answer 3

Whether your 2018 Thor Vegas has the V8 or the V10 the front anti-sway bar is part #RM-1139-176 (which replaces your factory swaybar) and the rear anti-sway bar is part #RM-1139-147. The anti-sway bars are definitely the first solution to a smooth…

view full answer...

Answer 4

The correct Roadmaster Rear Anti-Sway Bar for a 2022 Ford E-450 Cutaway is part #RM-1139-147 per Roadmaster.

view full answer...

Answer 5

I checked with my tech contact over at Roadmaster and while they're not familiar with the SAF-T-Plus steering stabilizer you mentioned, he did say that when installing the Roadmaster #RM-1139-176 it's ok to have a slight angle down/up on the…

view full answer...

Answer 6

For your 2022 Thor Outlaw 29J motorhome on a Ford E450 chassis, the correct steering stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM47MR. I verified the fitment of the #RM47MR directly with Roadmaster for you, and it does come with…

view full answer...

Answer 7

Your 2017 Thor Axis 24.1 is actually on an E-350 chassis according to my research, and I checked with Roadmaster about the correct fits for the anti-sway bars, which are the following: - Roadmaster Rear Anti-Sway Bar #RM-1139-117 - Roadmaster Front…

view full answer...

Answer 8

The Stromberg Carlson RV Exterior Ladder w/ Hinges #LA-401BA can utilize the same mounting points as your existing ladder on your 2015 Thor Vegas. This ladder is a universal fit, so you can adapt the stand off locations to fit your motorhome.…

view full answer...

Answer 9

The Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black #LA-401BA is completely universal and comes in black. This will replace your current ladder on your 2017 Thor Vegas Motorhome.

view full answer...

Answer 10

The reason there is drilling required to install the Roadmaster Rear Anti-Sway Bar #RM-1139-147 on your 2004 Ford Super Duty Class C motorhome is because the end links mount in a different location on the Roadmaster unit than the OEM unit. Check out…

view full answer...

Answer 11

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 12

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...