Could Torflex Lift Kit # K71-723-01 Fit Jayco Eagle 10FS

Question

Question:

would this lift work on my jayco eagle 10fs? its a 2001. and if so could i run larger tires?

asked by: Donald P

0

Expert Reply:

If your Jayco Eagle 10FS has a Dexter #9 Torflex axle with a 2,000 lb capacity the # K71-723-01 will fit and work well to give you a lift of 2-5/8 inches. With that extra lift you'd have more clearance to run a larger wheel and tire if you wanted to.

We don't have access to the tire size or axle type of your trailer though otherwise I'd look it up for you.

expert reply by: Jameson C

0

Answer 1

Yes, for your side-mounted Torflex axles the Torflex Lift Kit #K71-723-01 is the correct item. You will need two of these as you noted. These are not compatible with top-mounted torsion axles.

view full answer...

Answer 2

The correct axle riser kit for your Lippert Torsion Axle is the part #LC382741. I confirmed with my contact at Lippert that the spacing for the mounting will match up and it is compatible with your mounting holes being on the top.

view full answer...

Answer 3

Thank you for the pictures! I reached out to my contact at Dexter Axle who was able to confirm that you have #11 Torflex axles so the correct lift kit is part #K71-724-02. Since yours has top mounting holes you also need the bracket kit #DX57FR for…

view full answer...

Answer 4

I have a solution for you, but the #K71-723-01 is designed for Dexter torsion axles and will not fit a Lippert torsion axle, so it's not going to be the correct fit. From what I was able to find out from some research, the 2012 Forest River R-Pod…

view full answer...

Answer 5

Thank you for the photo of your camper's axle tag. Based on the serial number the correct lift kit is indeed part #K71-723-01 that you referenced, but I did check with Dexter Axle to make sure. This 2-5/8-inch lift kit will work only with…

view full answer...

Answer 6

A Torflex Lift Kit #K71-723-01 or #K71-707-02 will get you a lift of 2-5/8". The correct one for your application will depend on your axle. The Torflex Lift Kit #K71-723-01 is for a number 9 Torflex axle and has bolt holes that are 7-3/4"…

view full answer...

Answer 7

If you have a leaf spring suspension you will select one of two axle over-under kits (sometimes called axle flip kits) for your 1995 Jayco 1206 single-axle pop-up camper trailer based on the axle diameter. Kit #K71-384-00 works with 2-3/8-inch…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Could Torflex Lift Kit # K71-723-01 Fit Jayco Eagle 10FS

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching