Vehicle Protector/Rock Guard for Falcon Tow Bar and EZ5 Base Plates

Question

Question:

What model rock guard will fit a Roadmaster falcon #521448-5 tow bar?

asked by: HOWARD L

0

Expert Reply:

For the Roadmaster Falcon tow bars such as # RM-520 and the EZ5 base plates # RM-521448-5 the only vehicle guard that will work is the Roadmaster Tow Defender Protective Screening # RM-4750. I have included a link to a video featuring the Tow Defender for you.

expert reply by: Michael H

0

Answer 1

The Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs #RM-520 does not come with a cover, however there is one made to fit it. It is the Roadmaster Tow Bar Cover #RM-055-3. This cover is constructed of heavy-duty, marine grade…

view full answer...

Answer 2

Since the Roadmaster base plate kit you have is a direct connect base plate the correct rock guard is the part #RM-4750. This is a protective screening like you can see in the attached picture.

view full answer...

Answer 3

For a complete flat towing setup on your 2013 Jeep Wrangler Unlimited Rubicon you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Usually the parts alone cost…

view full answer...

Answer 4

In order to replace the Replacement Gas Struts part #RM-200023-50 on your Roadmaster Tow Defender Protective Screening part #RM-4750 you will first need to obtain a pick tool or a simple flathead screwdriver will suffice. Once you have this you will…

view full answer...

Answer 5

There is some assembly required on the Roadmaster Tow Defender Protective Screening #RM-4750, but it is not difficult. There are 8 bolts, 4 nuts, and 2 washers in the hardware kit. You'll be attaching the rods and the gas struts after sliding the…

view full answer...

Answer 6

The Roadmaster Tow Defender Protective Screening #RM-4750 that you referenced does not need additional brackets to attach to the Roadmaster NightHawk part #RM-677 as it comes with all of the hardware needed.

view full answer...

Answer 7

The difference between the #RM-4700 and the #RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part #RM-4700. The RM-4750 is not compatible with other style base plates.

view full answer...

Answer 8

The correct Roadmaster Tow Defender Protective Screening for the Roadmaster Direct-Connect Base Plate Kits is part #RM-4750. The correct Roadmaster Tow Defender Protective Screening for the Roadmaster Crossbar Style Base Plate Kit is part #RM-4700.…

view full answer...

Answer 9

For the EZ5 Roadmaster base plate kits the correct Tow Defender to use is the part #RM-4750. I have spoken with my contact at Roadmaster before about this and this is what they recommended.

view full answer...

Answer 10

Since the crossbar of the Tow Defender attaches to the shank of the tow bar it is installed on around corners the crossbar is going to always stay parallel to the rear of the vehicle. Around corners the portion of the defender that is on the outside…

view full answer...

Answer 11

Though I do have another option available for you, the Roadmaster Guardian Rock Guard #RM-4000 is not compatible with EZ5 base plates like the #RM-521453-5, unfortunately. With that said, the Roadmaster Tow Defender Protective Screening #RM-4750 is.…

view full answer...

Answer 12

It sounds like you're connecting the Falcon 2 tow bar, part #RM-520, to your 2016 Jeep Wrangler Rubicon to the D-rings on the front bumper with adapters like #RM-035 or #RM-035-1. If this is the case then yes, the Tow Defender, part #RM-4750,…

view full answer...

Vehicle Protector/Rock Guard for Falcon Tow Bar and EZ5 Base Plates

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching