Does Roadmaster Tow Defender # RM-4750 Fit Roadmaster Nighthawk Tow Bar

Question

Question:

Is there a Hardware Kit for Roadmaster Tow Defender Protective Screen RM-4750 to attach it to the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar RM-677?

asked by: Thom B

0

Expert Reply:

The Roadmaster Tow Defender Protective Screening # RM-4750 that you referenced does not need additional brackets to attach to the Roadmaster NightHawk part # RM-677 as it comes with all of the hardware needed.

expert reply by: Jameson C

0

Answer 1

I have a few different recommendations for you for your Thor Vegas and tow dolly. The first is a Swagman Traveller XCS, part #S64664. This is a bike mount with an integrated elevation, and it goes around 2-inch shanks. You'll need at least…

view full answer...

Answer 2

With the Roadmaster Nighthawk All Terrain, Tow Bar, #RM-677, if your cord length concern is from the image displayed showing the cord running through the cable guides on the opposite side of your jeep connection location, I get the concern. But no…

view full answer...

Answer 3

It sounds like you're connecting the Falcon 2 tow bar, part #RM-520, to your 2016 Jeep Wrangler Rubicon to the D-rings on the front bumper with adapters like #RM-035 or #RM-035-1. If this is the case then yes, the Tow Defender, part #RM-4750,…

view full answer...

Answer 4

We can definitely get your 2022 Jeep Wrangler Unlimited set up to be flat towed with all the best parts. I'll go ahead and list them out for you below then detail why: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 - Tow…

view full answer...

Answer 5

The Roadmaster Blackhawk 2 #RM-422 comes with just the tow bar, although one feature it does have is cable guides to protect your safety cables and wiring. The Blackhawk 2 has a shipping weight of 64 lbs, so its weight will pretty close to that. The…

view full answer...

Answer 6

I do have a solution for you and you are correct that the Roadmaster Tow Defender #RM-4700 is not compatible with the Roadmaster #921-3 base plates, since those are direct-connect base plates in the MX series. The series/model of the base plate is…

view full answer...

Answer 7

Since the Roadmaster base plate kit you have is a direct connect base plate the correct rock guard is the part #RM-4750. This is a protective screening like you can see in the attached picture.

view full answer...

Answer 8

I can help you out with all the parts needed to flat tow your 2021 Jeep Gladiator Mojave. It's a smart idea to make sure you're getting everything you need as there are quite a few parts, so I'll go ahead and make a list for you to make…

view full answer...

Answer 9

Since the crossbar of the Tow Defender attaches to the shank of the tow bar it is installed on around corners the crossbar is going to always stay parallel to the rear of the vehicle. Around corners the portion of the defender that is on the outside…

view full answer...

Answer 10

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

view full answer...

Answer 11

We can get your 2023 Jeep Wrangler Unlimited a complete flat tow set up, and I'll go ahead and list out all the parts you'll need for your Jeep. - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 - Tow Bar: Roadmaster…

view full answer...

Answer 12

Yes, since your tow bar setup uses direct connect Roadmaster base plates the Roadmaster Tow Defender Protective Screening #RM-4750 will fit and work great.

view full answer...

Does Roadmaster Tow Defender # RM-4750 Fit Roadmaster Nighthawk Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching