Demco Stay-IN-Play DUO Supplemental Braking System Review Video

We have just what you need! Roadmaster makes front and rear sway bars as well as a great steering stabilizer for your 2016 Coachmen Leprechaun 319DS. You will need the following: Front Sway Bar - #RM-1139-176 Rear Sway Bar- #RM-1139-147 Steering…

Correct, you do need a working battery for activation and continual operation of the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 and Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR. If…

This is actually a fairly common issue with the Demco Stay-IN-Play #DM86VR, and there are solutions. Since the turn signals and brake lights normally use the same wires, they use variable voltage to activate each circuit. The system is seeing a…

The Receiver Joint and Tow Bar Receiver Tube of your Demco Commander II Non-Binding Tow Bar #DM9511012 need to be level with each other. In your picture you can see that the top of the Receiver Joint is angled up on the Receiver Tube. You'll need…

For the 2022 Thor Quantum KW29 on E-450 chassis the correct rear sway bar you'd need is the Roadmaster #RM-1139-147 and then for a front bar part #RM-1139-176.

Yes, the etrailer #e67ZR tow bar is made for etrailer by Demco in the USA and has a lifetime limited warranty by etrailer. Demco parts will work on this tow bar, but Demco has no responsibility for warranty, repair, or service - you would need to go…

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

I do have an option for you but the Roadmaster Direct-Connect Base Plate Kit part #RM-521448-5 is designed to be used with the factory front bumper on a 2018 Jeep JK Wrangler only. Unfortunately, Roadmaster does not test this base plate kit with…

Looking at the pictures of the Blue Ox base plate kit part #BX1134 installed compared to the bumper pictures you sent in of your 2016 Jeep JK Wrangler Rubicon with the Smittybilt Gen 1 bumper this base plate kit would fit.

The Universal Group 6-Leaf Double-Eye Spring #e64SR referenced in your question is designed for 7,000 pound axles like what you have on your trailer. Most likely this will work great as a replacement, however I cannot be sure that it is a direct…

Are you sure you aren't exceeding the capacity of your trailer? Going with higher rated springs will give you additional spring capacity but will not increase the overall capacity of your trailer. The only way going with new leaf springs like…