How Much Assembly Is Required To Install The Roadmaster Tow Defender Protective Screening?

Question

Question:

How much assembly is required to the Roadmaster 4750 rockguard?

asked by: Charles N

0

Expert Reply:

There is some assembly required on the Roadmaster Tow Defender Protective Screening # RM-4750, but it is not difficult. There are 8 bolts, 4 nuts, and 2 washers in the hardware kit. You'll be attaching the rods and the gas struts after sliding the screen into place. It is a quick assembly with a couple wrenches or ratchets. I've attached the instructions for you to look at. It is a few minutes of assembly to add a great protection to your vehicle.

expert reply by: Jason S

0

Answer 1

Yes, the Roadmaster Tow Defender Protective Screening part #RM-4750 will work with a Blue Ox. In fact, the Roadmaster Tow Defender Protective Screening is actually designed for this exact purpose but I am not aware of a similar option from Blue Ox so…

view full answer...

Answer 2

The Roadmaster Tow Defender Protective Screening part #RM-4750 is compatible with Blue Ox tow bars and base plates. There is no separate adapter needed for this. There are multiple adjustment slots on the brackets that come with this kit. The…

view full answer...

Answer 3

Since the Roadmaster Tow Defender Protective Screening #RM-4750 fits Demco and Blue Ox base plate and tow bar setups it will work on your setup that has a Demco tow bar and a Blue Ox base plate.

view full answer...

Answer 4

As it comes the Roadmaster Tow Defender #RM-4750 will work with Blue Ox tow bars connected to Blue Ox base plates. So provided you are using a Blue Ox tow bar and have Blue Ox base plates on your vehicle you would not need anything else.

view full answer...

Answer 5

The Roadmaster Tow Defender that is designed to work with Blue Ox tow bars with Blue Ox brackets is part #RM-4750. This protective screen measures 40 x 72 inches and is designed to fit any RV with a 2 inch trailer hitch receiver.

view full answer...

Answer 6

I can help you out with all the parts needed to flat tow your 2021 Jeep Gladiator Mojave. It's a smart idea to make sure you're getting everything you need as there are quite a few parts, so I'll go ahead and make a list for you to make…

view full answer...

Answer 7

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

view full answer...

Answer 8

I do have a solution for you and you are correct that the Roadmaster Tow Defender #RM-4700 is not compatible with the Roadmaster #921-3 base plates, since those are direct-connect base plates in the MX series. The series/model of the base plate is…

view full answer...

Answer 9

Though I do have another option available for you, the Roadmaster Guardian Rock Guard #RM-4000 is not compatible with EZ5 base plates like the #RM-521453-5, unfortunately. With that said, the Roadmaster Tow Defender Protective Screening #RM-4750 is.…

view full answer...

Answer 10

Since you have a set of base plates that does not use the crossbar the tow defender you need is the part #RM-4750 as the other one mentioned requires the crossbar to be present.

view full answer...

Answer 11

For the EZ5 Roadmaster base plate kits the correct Tow Defender to use is the part #RM-4750. I have spoken with my contact at Roadmaster before about this and this is what they recommended.

view full answer...

Answer 12

The Roadmaster Tow Defender Protective Screening is an excellent option to help protect your vehicle while in tow from both larger debris and smaller debris. This debris not only dirties up the vehicle but can also lead to damage such as scratches so…

view full answer...

How Much Assembly Is Required To Install The Roadmaster Tow Defender Protective Screening?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching