Recommended Leaf Spring Capacity for a Conversion Boat Trailer
Question:
I have an older boat trailer with, what I believe to be, leaf springs that are probably around 1000 lb capacity each. I believe its a 2000 lb axle. I am setting it up to be a kayak trailer and the typical load will be 160-200 lbs and will probably never exceed 350 lbs with 2 kaysks. Assuming the trailer frame itself is 150 lbs, would it be acceptable and be a better ride on the equipment to install lighter leaf springs say 300 lb capacity x 2 in leu of the 2000 total capacity springs? Or am I totally misunderstanding the concept of the suspension?
asked by: Kevin
Expert Reply:
Yes and no, a leaf spring with a lower capacity will provide a better quality ride than a leaf spring with a higher capacity but you will not want to make that part the lowest rated suspension component. Typically, we recommend choosing a leaf spring with a capacity that either meets or exceeds the capacity of the axle. I would be skeptical if the leaf spring pack you have now is only rated at 1,000 lbs.
However, since you have converted a boat trailer to a light duty kayak carrier I suppose it would be okay to choose a leaf spring with a capacity lower than than the axle capacity but I would not go as low as 300 lbs. For your application, I would stick to a set of leaf springs rated around 1,000 lbs -1,500 lbs. Using a 300 lb leaf spring on this trailer would be very bouncy and unsafe.
In order to recommend the correct leaf springs for your trailer, I would need to know the style (slipper/double eye) in addition to the overall length/width. Please keep in mind that over time as springs wear out they will tend to be a bit longer than when originally installed. I have attached our leaf spring selection for you as well.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-177275 Review
- Search Results: deck plates
- Search Results: decking
- Search Results: wheel only
- Search Results: wheel
- Search Results: 15 inch wheel
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Article: Trailer Tire Sizing
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: leaf spring
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Trailer Wiring
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Article: 7 Common Questions Everyone Has About Trailer Tires
on Trailer Suspension Parts
