Recommendation for Parts Needed to Flat Tow a 2007 Jeep Liberty

Question

Question:

I will assume that I need base plates for the Tow Ready Adjustable Tow Bar, 5,000 lbs, If so can you tell me which ones I need Thank You

asked by: Ray G

0

Expert Reply:

You are correct. For your 2007 Jeep Liberty, you will need base plates to flat tow it. You can use the EZ4 Style Base Plates, # RM-521423-4. I have included a link to a video showing a typical installation. If you would like to use the Tow Ready Tow Bar, # 63180, you will need to use an adapter, # RM-025, and Quick Disconnects, # RM-201, to adapt the tow bar to the base plates. You will also need to Keep in mind that this tow bar is rated for towing speeds of 45 miles per hour or less. I have included a link to the installation details for the tow bar.

A better tow bar option would be the RoadMaster Tracker Tow Bar, # RM-020, which is designed for towing long distances and more frequently. With this tow bar you will need a set of Quick Disconnects, # RM-201, to easily connect and disconnect the tow bar from the base plates.

To complete the towing set up for the Liberty, you will also need safety cables, wiring, and a supplemental braking system. For safety cables, I recommend RoadMaster 64 inch Single Hook, Coiled Safety Cables, # RM-643. The coiled design keeps the cables from making contact with the ground.

For wiring, there are a couple of options. If you do not plan on towing the Liberty very often, I would go with a magnetic light kit like # RM-2120. If you do plan on towing it frequently, it would beneficial to install diodes, # RM-154. I have included a link to a video showing a typical installation.

Most states now require a supplemental braking system on the vehicle being towed. The easiest to use and install is the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This unit installs quickly so you are ready to go in minutes. It engages the towed vehicle brakes proportionally to how much the towing vehicle is braking, reducing wear of both the towing vehicle and towed vehicle brakes.

Finally, you will need to check with the manufacturer and/or your vehicle owners manual for instructions on the proper procedure for towing your vehicle because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed. I have included a link to our series of FAQ articles on flat towing for you.

expert reply by: Michael H

0

Answer 1

In order to flat tow your Liberty, you will need to install a base plate kit. I would recommend the Roadmaster EZ4 Base Plate Kit, part #RM-521423-4. A base plate offers a safe and secure attachment point to the vehicle. This particular Roadmaster…

view full answer...

Answer 2

In order to flat tow your Jeep Liberty behind an RV/motorhome, you need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and likely a high-low adapter. Starting with the base plate kit, I recommend the…

view full answer...

Answer 3

The installation of the Roadmaster Direct-Connect Base Plate Kit part #RM-521423-5 will be the same on a 2002 - 2007 Jeep Libery. Therefore, you can use the installation video attached below on a 2007 model to guide you through the install process. I…

view full answer...

Answer 4

For your 2012 Jeep Liberty, I recommend starting with the Roadmaster EZ Base Plate Kit - Removable Arms #521434-1 because the system is almost invisible when not in use. It will provide a solid connection to your vehicle for the Roadmaster Sterling…

view full answer...

Answer 5

Flat towing a vehicle requires specific equipment to tow the vehicle safely and in accordance with local, state, and federal laws. A front mount hitch is not suitable for use to flat tow a vehicle behind an RV but I can tell you all of the parts that…

view full answer...

Answer 6

According to my research, the 2007 Saturn Vue is capable of being flat towed without modification, but I'd urge you to confirm that for yourself. From what I've read, it's not recommended to tow the vehicle above 65 mph, and there are…

view full answer...

Answer 7

To flat tow a 2007 Nissan Titan I recommend the Roadmaster Crossbar-Style Base Plate Kit, #341-1 and the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar, #RM-422. For safety cables you can use #RM-643. The coiled design helps keep the cables…

view full answer...

Answer 8

To flat tow a vehicle, you'll need a hitch on the motor home, a towbar, a base plate kit installed on the tow vehicle, a tow bar wiring kit so that the taillights on the vehicle work along with those on the motor home, safety cables and a…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Recommendation for Parts Needed to Flat Tow a 2007 Jeep Liberty

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching