Can the Toolbox Mounting Kit TH25200 be Used on TracRac Sliding Ladder Racks with Over-Cab Extension

Question

Question:

Can a tool box be put on this product or only the one without the extension. Rack can mount a tool box ?

asked by: Robert L

0

Expert Reply:

Toolbox Mounting Kit # TH25200 can be used with any of the TracRac sliding ladder racks including # TH43003XT-510EX. For either style of the TracRac sliding ladder rack the front uprights mount to the outer tracks on the base rail. The inner track will be used for the toolbox mount.

expert reply by: Michael H

0

Answer 1

When the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs #TH43003XT-510EX is slid all the way forward in the unused position, it will take up about 16" of bed rail length. This is confirmed to fit your 2006 Ford F-250…

view full answer...

Answer 2

If your tonneau cover leaves the top surface of the bed sides free, we do have some ladder racks available that would work for you. The Thule TracRac SR, with cantilever #TH43003XT-010 or without #TH43003XT-010EX cantilever would be a great choice.…

view full answer...

Answer 3

The base rails for the TracRac Sliding Truck Bed Ladder Rack, #TH43003XT-010, measure 97 inches long, 4-3/4 inches overall width, 2 inches overall height, 1-1/2 inches height at center, 1 inches wide rails at top and sides and 1-1/2 inches between…

view full answer...

Answer 4

The base rails that are designed to fit the 2018 Fort F-150 (5-1/2 foot bed) - Ford Super Crew Trucks #TH21508 come with the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs #TH43002XT-508. The Base Rails for Thule TracRac SR Sliding Truck…

view full answer...

Answer 5

Do you have a TracRac ladder rack installed currently with the overhead extension? Did you use the recommended parts for your truck or did you modify something else? I checked with Thule TracRac and they recommend the part number #TH43003XT-510EX for…

view full answer...

Answer 6

We have just the ladder rack you are looking for. I recommend the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension, part #TH43003XT-010EX. This ladder rack slides along th efull length of your truck bed and can be easily removed…

view full answer...

Answer 7

It is usually possible to replace the spring bars in a weight distribution hitch setup so long as the two sets of bars are the same type, both trunnion style for instance, and both are from the same generation of hitch. A 10-year-old setup may not be…

view full answer...

Answer 8

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 9

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 10

That's great information - I appreciate it! The Gen-Y Executive needs at least 1,600 lbs tongue weight to be able to use the lightest option. When using a 5th wheel or gooseneck setup you want your tongue weight to be 20% of the weight of the…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The Rota-Flex Lockout Kit for Blue Ox 5th Wheel Hitches #BLU62XR is just a lockout kit to prevent the Rota-Flex head from pivoting, making it a standard pin box again so you shouldn't have a problem using it with your Andersen Hitch.

view full answer...