Trailer Hitch Recommendation for 2018 Honda CR-V

Question

Question:

2018 crv awd touring . i see there are 2 types of wiring kits. i will not do much towing of golf cart but using cargo basket.

asked by: Jerry

0

Expert Reply:

For a trailer hitch for your 2018 Honda CR-V that will work the best you'd want the Curt hitch part # C13397. This hitch has a crosstube that sits up higher than the other hitches for your vehicle with a hitch opening that welds to the bottom instead of in front.

expert reply by: Jameson C

0

Answer 1

For Curt trailer hitch #C13397 it is recommended to remove the lower fascia if your 2017 Honda CR-V has the hands-free liftgate option so that it and the sensor bracket can be trimmed. Regardless though removing the fascia or at least loosening it…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver part #C13397 is what I recommend for a 2020 Honda CR-V (All Models) because it has a hidden design therefore only the receiver tube will be shown which gives a factory-like appearance and does not reduce ground…

view full answer...

Answer 3

The best trailer hitch for your 2018 Honda CR-V Touring with the hands-free tailgate is the Curt, part #C13397. I prefer the Curt over the Draw-Tite hitch, part #76128, because the Curt's crossbeam is completely hidden behind the vehicle's…

view full answer...

Answer 4

We had a customer with a 2017 Honda CR-V Touring just like yours who told us that the Curt hitch part #C13397 did not interfere with their hands free liftgate at all. You would not need to move any sensors.

view full answer...

Answer 5

We do have a hitch for the Touring model of the 2017 Honda CR-V. It is the etrailer Trailer Hitch item #e98848. This is the only hitch confirmed to fit the Touring model. As far as the foot activated lift gate sensor is concerned there is a…

view full answer...

Answer 6

Our fitguide can be a bit confusing but the Curt hitch part #C13397 DOES fit the hybrid models of the 2020 Honda CR-V like yours. We have it listed twice in the fitguide results as a fit for the Hybrid models and a fit for the non-hybrid models which…

view full answer...

Answer 7

The Thule key part #THKEYY003 is for Thule brand accessories and not Bosal.

view full answer...

Answer 8

Both the Draw-Tite #76128 and the Curt #C13397 Class III trailer hitch receivers do connect to the frame of your 2017 Honda CR-V in the same location. However, if you look at the photos I've attached, you can see that the cross tubes are not…

view full answer...

Answer 9

The trim area is skewed to the drivers side. In the 2020 model year video, at the 4:15 mark you can see that it is skewed to the drivers side, or to say left of the tow hook. What our own installers do is to put one bolt in each side (closest to the…

view full answer...

Answer 10

We have some hitch options that are compatible with the Hands Free Tailgate feature on your 2019 Honda CR-V. That being said, the Hands-free Liftgate sensor areas may be limited to areas away from the center where hitch receiver opening is located.…

view full answer...

Answer 11

I would be happy to answer your questions. The Curt Hitch Receiver item #C13397 is a confirmed fit for your 2022 Honda CR-V Touring. According to Curt there have been some redesigns to this hitch to make it more compatible with the auto lift gate…

view full answer...

Answer 12

The best trailer hitch for a 2020 Honda CR-V for a bike rack like your Yakima RidgeBack 4-Bike Rack #Y02458 is a 2 inch hitch, the Draw-Tite Trailer Hitch Receiver #76128. A 2 inch hitch is always preferable to a 1-1/4 inch hitch, as there is no…

view full answer...

Trailer Hitch Recommendation for 2018 Honda CR-V

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching