Trailer Hitch Recommendation for Rear of 2006 Keystone Raptor 3712TS

Question

Question:

What hitch would you recommend for my Toy hauler so I can pull another trailer behind camper? Its a 2006 Keystone Raptor 3712TS toy hauler.

asked by: David G

1

Helpful Expert Reply:

Our most universal fitting RV hitch is the Curt multi-fit hitch part # 13703 which can fit basically all frame styles between 22 and 72 inches apart.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

1

Answer 1

We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch #C13701 would be an excellent choice, with it's tongue…

view full answer...

Answer 2

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

view full answer...

Answer 3

Yes, I can confirm that the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 does include the bumper safety struts #MO22FR you're referencing.

view full answer...

Answer 4

For the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR I recommend using the Fulton Economy Spare Tire Carrier, #FETCLB0201 to mount your spare to hang under the cargo carrier.

view full answer...

Answer 5

Yes the brackets of the 24x64 etrailer Cargo Carrier for RV Bumper #e83YR that you referenced would get bolted to the frame rails under the bumper to give it more support so that you could carry heavier items like generators.

view full answer...

Answer 6

The Adjustable Width Trailer Hitch Receiver for RVs part #13703 is what I recommend for a Grand Design Solitude. It features a 3,500 lb gross trailer weight capacity and 350 lb tongue weight rating. This will be the most offered for a trailer as…

view full answer...

Answer 7

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 8

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

view full answer...

Answer 9

The center to center measurement of the mounting bracket bolt-holes for the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR is 5-7/8". Additionally, there are two other bolts holes on the angle brackets that measure 3-1/8"…

view full answer...

Answer 10

The available trailer hitches for the 2016 Ford Transit T350 are not designed to fit the cab and chassis/cut away models but we do have options that you could use. The most popular option is #13703. It can actually be bolted on or welded on. Welding…

view full answer...

Answer 11

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

view full answer...

Answer 12

For the hitch prep on a 2019 Cherokee Artic Wolf I believe the prep brackets will use the Lippert 1-1/4" Trailer Hitch Receiver for I-Beam Campers and Trailers - 68-3/8" Width #LC240220. You will need to measure the brackets to confirm the…

view full answer...