Wheel Lock for Spare Tire and 1/2"-13 Threaded Stud

Question

Question:

I have a Casita trailer with a spare tire on the back held in place with a regular 1/2 inch bolt with 13 threads per inch. I am looking for a locking type lug nut for the bolt to prevent thieves from taking the spare. Have anything?

asked by: Ron D

0

Expert Reply:

We have spare tire lock # FSTL0603 that you could use. It works with wheel studs up to 9/16 inches. I have included a link to a video review of this lock for you.

expert reply by: Michael H

0

Answer 1

I don't have reference information that would tell me the diameter of the wheel studs or the wheel bolt pattern used by your Rockwood Pop-Up. A master catalog that shows which OEM parts were used by the various RV and Camper manufacturers would…

view full answer...

Answer 2

Based on the weight range of Casita travel trailers the best weight distribution and sway control we have would be the Reese Strait Line part #RP66082 which has a tongue weight range of 200-600 lbs and features the best sway control at fighting sway…

view full answer...

Answer 3

The first step in choosing a weight distribution system is to conclusively determine the tongue weight of your camper once it is fully loaded and ready to tow. This includes full water and propane tanks plus any other gear you would typically travel…

view full answer...

Answer 4

Hey Jim! The Taskmaster and Westlake tires, like the Taskmaster ST235/75R15 Off-Road #TA45RR and Westlake ST235/75R15 Off-Road #WST54FR you were looking at, are made in China. A lot of people tend to shy away from trailer tires made in China but…

view full answer...

Answer 5

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 6

I went out to the warehouse and pulled wheel lock set #RG01-150. The overall internal depth of the nuts that thread onto the wheel studs is 1-1/4 inches including the threaded part. The threads make up 3/4 of an inch of that 1-1/4 inch overall…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

First you are going to need to determine if your particular winch can be used with a strap instead of a cable. Some winches will accept either but other winches must be used with one or the other. Contact your winch manufacturer to determine if your…

view full answer...

Answer 9

90-120 ft lbs of torque is probably about right for your 15 inch trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher. You'll need to know the diameter of the…

view full answer...

Answer 10

For a trailer that will be used in saltwater, the best option for rotors, hubs, and calipers is those made of stainless steel. Galvanized coating is the second best option for saltwater, and then dacromet coatings, which provide extra resistance to…

view full answer...

Answer 11

There are several common lug nut sizes found on trailers: 7/16, 1/2, 9/16, and 5/8. The most common is 1/2 inch. If you have the common 1/2 inch wheel bolts then the Redline Wheel Lock Set, Item #RG01-150, are a great fit. Send me your trailer weight…

view full answer...

Wheel Lock for Spare Tire and 1/2"-13 Threaded Stud

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching