B and W Turnoverball Gooseneck Hitch Recommendation to Fit 2004 Ford F-350 Short Bed Dually

Question

Question:

I have a 2004 F350 shortbed with a crew cab thats a dually. Will the following item fit my truck nItem # BWGNRK1108ormally:

asked by: David

0

Expert Reply:

Yes, the B and W Turnoverball Gooseneck Hitch part # BWGNRK1108 is a confirmed fit for your 2004 Ford F-350 short bed dually and will work well.

I attached an install video that shows this hitch installed in a similar 2004 Ford F-350 for you to check out as well.

expert reply by: Jameson C

0

Answer 1

In your 2000 Ford F-250 with 8-foot bed the B&W Gooseneck Hitch #BWGNRK1108 will install with the center of the ball positioned 47-inches from the rear edge of the bed. For this gooseneck hitch there is no front-to-back adjustment; it can only…

view full answer...

Answer 2

The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1108 is a fit for both bed lengths in a 2001 Ford F-250. The 8 foot bed and 6-3/4 inch bed will have the same measurement for the gooseneck ball…

view full answer...

Answer 3

The B&W Turnoverball Gooseneck Custom Installation Kit for Ford #BWGNRM1108 is the only way to get the parts you are describing. This is the installation kit without the center section #BWGNRC800 that make up the B&W Turnoverball Underbed…

view full answer...

Answer 4

There is no difference between the two. We have two similar but different part numbers because we market the #BWGNRK1108 as a gooseneck hitch and the #BWGNRK1108-5W as the mount for the #BWRVK3400 sliding version of the B&W Companion 5th wheel…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I looked up the air bag kit you have installed on your 2005 Ford F-350 and since it installs on the inboard side of the frame rail you could install and use a gooseneck hitch like the B and W Turnoverball part #BWGNRK1108 since it attaches to the…

view full answer...

Answer 7

There's only one set of air bags that is compatible with the B&W Turnover Ball System item #BWGNRK1108 and your 2003 F-350. It is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88390. All of the…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The only true way to find out the gooseneck towing capacity of your 2001 Ford F-350 is to subtract the gross vehicle weight (GVW) from the gross combined weight rating (GCWR) which should both be displayed on the white sticker inside your door jamb.…

view full answer...

Answer 10

The correct airbag kit for a 2000 Ford F-350 with B&W Gooseneck Hitch is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part #AL88390. The center bolt for the upper air bag bracket will actually go though the side plate for the…

view full answer...

Answer 11

The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…

view full answer...

B and W Turnoverball Gooseneck Hitch Recommendation to Fit 2004 Ford F-350 Short Bed Dually

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching