Rhino Rack Pioneer Platform Cargo Tray that Fits 2017 Toyota RAV4

Question

Question:

Rhino Rack Pioneer Platform for 2017 Toyota Rav4. RR recommends platform 44100B while eTrailer recommends 42115B. Is there a reason for this difference in recommendations? RR packages these together as JA9133 - is this the equivalent of the RR4200BF + RRSX100 that I have in the shopping cart? Thanks!

asked by: Frank

0

Expert Reply:

For your 2017 Toyota RAV4 we have the Rhino-Rack Pioneer Platform # RR42115BF that you referenced as a fit for your 2017 Toyota RAV4 with factory crossbars. Rhino Rack has changed part numbers a few times and we don't have access to the older part numbers you mentioned.

As long as you have factory crossbars on your 2017 Toyota RAV4 this platform will fit and work well.

expert reply by: Jameson C

0

Answer 1

Yes! The Inno Roof Deck Platform Rack #INA520 will fit perfectly on the Yakima JetStream crossbar system you have installed on your 2021 Toyota RAV4. I actually had an opportunity to install this Roof Deck on a 2019 RAV4 and I'll be linking…

view full answer...

Answer 2

I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - #Y00425 SkyLine Towers - #Y53TR…

view full answer...

Answer 3

Unfortunately no, the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers #Y05042 will not work with the Yakima Baseline towers. To get a Yakima LockNLoad platform on your Baseline Towers for your 2016 Chevrolet Silverado you would need…

view full answer...

Answer 4

The Rhino Rack 58" x 47 " Pioneer Platform #RR42115BF is a confirmed fit per Rhino Rack for your 2018 Subaru Outback Wagon but I think you would have issues mounting this. We have not had the opportunity to test this out ourselves…

view full answer...

Answer 5

I do have a solution for you, however the Inno Shaper 100 Roof Cargo Basket #INXA569 referenced in your question will not work with the T-channel on your Yakima JetStream Crossbars. The channel dimensions on the JetStream bars do not match up with…

view full answer...

Answer 6

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

view full answer...

Answer 12

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x…

view full answer...