Can the LockNLoad SL Adapter Be Used on Yakima BaseLine Towers

Question

Question:

I have a set of 4 baseline towers. I understand the difference between them is the roof mounting, 1 uses bases with clips and other attaches to fixed mount, tracks. so if thats the only difference, can I mount a lockNload platform directly to the baseline towers with sl adapters like the skyline towers ?

asked by: Steve

0

Expert Reply:

Unfortunately no, the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042 will not work with the Yakima Baseline towers.

To get a Yakima LockNLoad platform on your Baseline Towers for your 2016 Chevrolet Silverado you would need to first install crossbars.

- Yakima JetStream Crossbars # Y00426

You could then use one of the Yakima LockNLoad platform racks for crossbars which will attach to crossbars instead of directly to the towers.

- Yakima LockNLoad Platform Rack for Crossbars # Y05044-39

expert reply by: Scott S

0

Answer 1

Yes! The Inno Roof Deck Platform Rack #INA520 will fit perfectly on the Yakima JetStream crossbar system you have installed on your 2021 Toyota RAV4. I actually had an opportunity to install this Roof Deck on a 2019 RAV4 and I'll be linking that…

view full answer...

Answer 2

The Rhino Rack 58" x 47 " Pioneer Platform #RR42115BF is a confirmed fit per Rhino Rack for your 2018 Subaru Outback Wagon but I think you would have issues mounting this. We have not had the opportunity to test this out ourselves to…

view full answer...

Answer 3

I do have a solution for you, however the Inno Shaper 100 Roof Cargo Basket #INXA569 referenced in your question will not work with the T-channel on your Yakima JetStream Crossbars. The channel dimensions on the JetStream bars do not match up with…

view full answer...

Answer 4

I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - #Y00425 SkyLine Towers - #Y53TR Landing…

view full answer...

Answer 5

For your 2017 Toyota RAV4 we have the Rhino-Rack Pioneer Platform #RR42115BF that you referenced as a fit for your 2017 Toyota RAV4 with factory crossbars. Rhino Rack has changed part numbers a few times and we don't have access to the older part…

view full answer...

Answer 6

The Yakima DeepSpace 10 Rooftop Cargo Box #Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part #Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any…

view full answer...

Answer 7

You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part #Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems…

view full answer...

Answer 8

For your 2018 Ford Transit Long Wheelbase with the factory crossbars Yakima has the LockNLoad Platform Roof Tray part #Y05044 as a confirmed fit which I think you'd really like. It's lower profile, aluminum, easy to install, and also 55 inch…

view full answer...

Answer 9

The center-to-center measurement for the T-Slots on the Yakima LockNLoad Platform Rack #Y05044-39 is 5" (see attached). Attached is a review video for you to check out!

view full answer...

Answer 10

The Yakima LockNLoad Platform Racks like part #Y05044-39 won't work with roof boxes so if you have a 2019 Toyota Land Cruiser the Rhino-Rack Pioneer SX Platform Rack part #JA9134 would be a better option. Furthermore, the LockNLoad requires…

view full answer...

Answer 11

I had the Yakima SkinnyWarrior Roof Rack Cargo Basket - Steel - 58" Long x 23" Wide #Y07014 pulled and personally measured the distance between the rungs and found that each one is spaced 3-1/8" apart. The brackets for this roof basket…

view full answer...